Cisco Systems N55M4Q manual Under the Desk- or Shelf-Mounting

Chapter 2 Switch Installation

Mounting the Switch

Figure 2-2 Mounting the Switch on Top of a Desk or Shelf

MODE

CONSOLE

SYST STAT DPLX SPD PoE PD

1
2
3
4				Series
					PD
5			6
			7
			8
POWER
	OVER	ETHERNET	1
			2

1

2

3

282394

1 Slides on this way 3 Desk or shelf

2Screws

After you mount the switch, see the “After Installing the Switch” section on page 2-31for information about configuring the switch.

Under the Desk- or Shelf-Mounting

Step 1 Use the screw template to align the mounting screw holes and also as a guide to make sure the screws are installed under the desk or shelf with proper clearance.

Step 2 Position the screw template underneath the desk or shelf so that the two side-by-side slots face the front of the desk or shelf, as shown in Figure 2-3. This ensures that the power cord faces the rear of the desk or shelf after the switch is mounted.

Step 3 Peel the adhesive strip off the bottom of the screw template, and attach it to the underside of the desk or shelf.

Catalyst 3560-C and 2960-C Switch Hardware Installation Guide

2-8 OL-23803-02