Cisco Systems N55M4Q manual On a DIN Rail, Attaching the DIN-Mount Tray to the Switch

Chapter 2 Switch Installation

Mounting the Switch

On a DIN Rail

The DIN-mount kit (part number CMP-DIN-MNT=) is optional. You can order it when you order your switch, or you can order it later from your Cisco representative.

The DIN-mount kit contains:

•Two number-10 Phillips pan-head screws

•DIN rail mount

To install the switch on a DIN rail, follow the instructions described in these sections:

•Attaching the DIN-Mount Tray to the Switch, page 2-20

•Mounting the Switch on a DIN Rail, page 2-21

•Removing the Switch from a DIN Rail, page 2-23

Attaching the DIN-Mount Tray to the Switch

Step 1 Place the switch on the DIN rail mount. See Figure 2-17.

Figure 2-17 Placing the Switch on the DIN-Mount Tray

MODE

CONSOLE

SYST STAT DPLX SPD PoE PD

1	2		3
				4	5	6			Series
							7
								8
POWER
	OVER	ETHERNET						1
								2

PD

1

2

344212

1

Switch

2

DIN rail mount

	Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
2-20	OL-23803-02