Cisco Systems DMS-100, SL-100 manual CompuCALL Session Simple Case

Page 26

26Unified ICM Configuration

2.10.1.Simple Case

In the simplest case, only one CompuCALL Session is configured in the DMS PIM, in the third-party application, in CCS, and at the DMS-100 (see diagram below).In this simple case, exactly one connection will be used:

1.Between CCS and the third-party application (X.25 or TCP)

2.Between CCS and the DMS PIM (Cisco proprietary EMT interface)

3.Between CCS and the DMS-100 (X.25 or TCP).

Figure 4: CompuCALL Session: Simple Case

In this simple case, which will likely also be the typical case, the CCS setup requires the configuration of the following:

1.One ACD Link of type X.25 or TCP (from CCS to the DMS-100)

2.One application Link of type X.25 or TCP (from CCS to the third- party application)

3.One Session – which includes which ACD Links are used by the Session (from item 1 above)

4.Two applications for the Session:

•One for the third-party application -- which includes which application Links are used by the third-party application (from item 2 above)

•One for the DMS PIM

Once the CCS is configured and running, the third-party application and the DMS PIM can execute the following steps (just as they would if connected directly to the DMS-100):

1.Create a connection (either X.25 SVC or TCP for the application, EMT for the PIM)

2.Send a Session Logon message on the connection

3.DN Associate those Agents or Agent groups to be monitored

When the PIM or the third-party application logon, whichever is first, CCS will establish a connection to the DMS-100 and send the logon message to establish a CompuCALL Session with the DMS-100. This Session will be shared by both the third-party application and the DMS PIM, once both have logged on. The DMS-100 Session will be maintained as long as either the third-party application or the DMS PIM remains logged on to the CCS. (Generally, either the third-party application or the PIM can log on first; however, the third-party application and the PIM can be assigned a

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Cisco Unified ICM ACD Supplement for Nortel DMS-100/SL-100 Cisco Unified ICM ACD Supplement for Nortel DMS-100/SL-100 Contents Iv Contents Index Index-1Contents TablesPage Organization PurposeAudience ViiViii Preface Typographic ConventionsOther Publications Preface Preface Overview DMS100 PG with CompuCALL Link OverviewCCM Matrix1 CCM Matrix SupportDMS100 PG with CompuCALL Link CCM Matrix2CompuCALL Interface Requirements and Limitations CompuCALL Interface LimitationsNortel DMS100 Switch Limitations Nortel DMS100 Switch LimitationsPage Unified ICM Configuration Skill Groups Configuring the DMS-100 ACDServices Labels Configuring the AgentsDialed Numbers LabelsCompuCALL Session Parameters PG CompuCALL Session ConfigurationDMS-100 PG Label Format Label Format Example MeaningPeripheral Monitor Configuration of ACD Positions PG CompuCALL X.25 Link ConfigurationPeripheral Monitor Configuration of ACD Positions CompuCALL Link ParametersUnified ICM Configuration Peripheral Monitor Configuration Window Extension Formats Extension Example Meaning FormatCompuCALL Server CompuCALL ServerTransferring Calls to Non-monitored Devices Param String FormatsSimple Case CompuCALL Session Simple CaseComplex Cases CompuCALL Session Complex Case Option Option Description Value Default Name Min Max Setup DetailsCompuCALL Server Setup Options Unified ICM Configuration ACD Link Setup Name Min Max ACD Link Setup OptionsOption Option Description Session Object Setup Session Object Setup Options Option Name Option Description Value Default Min MaxNot implemented Application X.25 Link Setup Application Link Setup Options Application Configuration Application Configuration Options Example of Walk-Away Codes Support for Walk-Away Reason CodesSupport for Walk-Away Reason Codes Walk-Away Codes DefinitionPeripheral Targets and Routes Object MappingPeripheral Trunks ServicesTrunk Groups Object MappingUnified ICM DMS-100 Service Description Default Peripheral RouteUnified ICM to DMS-100 Service Mapping Unified ICM Skill DMS-100 Skill Group Description Skill GroupsUnified ICM to DMS-100 Skill Group Mapping Unified ICM to DMS-100 Agent Mapping AgentDMS-100 Agent State to Cisco Agent State Mapping Unified ICM DMS-100 Agent DescriptionLabels Monitoring Agent Skill Group Assignment ChangeDialed Numbers Peripheral Monitor Table EntriesUnified ICM Configuration ACD Configuration Operation Interface CompuCALL Bandwidth Requirements DMS-100 CompuCALL Interface Specification Q218ACD Configuration Operation Interface DMS-100 Switch Statistics Provided by Nortel DMS-100 CompuCALL Interface Specification Q218DMS-100 Switch Capacity Parameter Maximum Meaning ValueDMS-100 CompuCALL Message Size Message Type BytesDMS-100 Peripheral Gateway Capacity Post-Routing Eicon Card Configuration Eicon Card Configuration Details Eicon Card ConfigurationEicon Card Configuration Details NoneEcmodule Trace Hdlc /P Appendix a DMS100 Switch Datafill Example Appendix a DMS100 Switch Datafill Example Table ScaicomsTable Scaigrp Appendix a DMS100 Switch Datafill Example Table Scaiprof Table Acdgrp Index Index-1Index-2

SL-100, DMS-100 specifications

Cisco Systems DMS-100 and SL-100 are advanced digital media systems that play a crucial role in the telecommunications landscape. These platforms are designed primarily for the efficient delivery of voice and data services, making them integral components in the next-gen network architecture.

The DMS-100 is known for its robustness, serving as a digital central office switch. It supports the essential functions of voice service delivery, including call processing, routing, and signaling for local and long-distance calls. One of its standout features is its adaptability, allowing service providers to scale services based on demand. This scalability ensures that operators can efficiently manage large volumes of voice traffic without compromising on quality.

On the other hand, the SL-100 is distinguished by its flexibility and cost-effectiveness. It is a compact, modular platform that enables operators to offer a variety of services, including VoIP, multimedia communications, and more. The SL-100’s design caters to smaller service providers or those looking to extend their services without a massive infrastructure investment. Its modularity ensures that operators can add or change functionalities as the market evolves.

Both systems incorporate advanced technologies crucial for modern telecommunications. They leverage softswitch technology, which facilitates the transition from traditional circuit-switched networks to IP-based architectures. This shift allows for better resource utilization and reduced operational costs, as voice calls can be transmitted over existing data networks.

Moreover, both the DMS-100 and SL-100 support HD Voice and other enhancements that ensure crystal-clear voice quality. They employ various codecs and signaling protocols, including H.323 and SIP, ensuring compatibility with a wide range of devices and platforms. Additionally, both systems provide extensive monitoring and management capabilities, allowing service providers to analyze performance metrics and quickly troubleshoot issues.

In terms of security, Cisco has integrated several features that protect against unauthorized access and service disruptions. This focus on security is essential, particularly as networks become more interconnected and exposed to potential threats.

Overall, the Cisco DMS-100 and SL-100 embody pioneering technologies that meet the demanding needs of modern telecommunications. Their combination of scalability, flexibility, security, and advanced features makes them invaluable assets for service providers striving to deliver high-quality voice and data services in an ever-evolving digital landscape.
Top Page Image Contents