Cisco Systems OL-23421-02 manual Router Compact Flash Memory Cards

Page 15

Chapter 1 Product Overview

Router Compact Flash Memory Cards

Table 1-6

GRWIC-D-ES-2S-8PC Switch Module (Copper Model) LED Descriptions (continued)

 

 

LED

Description

 

 

FE0/1 to

Indicates state of the Fast Ethernet ports:

FE 0/8

• LED is flashing green—data transmission is taking place.

 

 

• LED is off—the link is down.

 

• LED is solid yellow—the port is in an error state (disabled).

 

 

GE0/1

Indicates the state of the Gigabit Ethernet dual purpose port:

 

• LED is flashing green—data transmission is taking place.

 

• LED is off—the port is down.

 

• LED is solid yellow—the port is in an error state (disabled).

 

 

GE0/2

Indicates the state of the 1000 Mb/s SFP module slot:

 

• LED is flashing green—data transmission is taking place.

 

• LED is off—the port is down.

 

• LED is solid yellow—the port is in an error state (disabled).

 

 

Router Compact Flash Memory Cards

Compact flash cards can help you configure new or replacement routers, and to recover the configuration of a failed router. For example, if the Connected Grid Swap Drive feature is enabled, you can transfer the same system configuration information from one router to another by using a compact flash memory card (or compact flash card) while the routers are operating. This is done by inserting an optional compact flash card in slot CF1 and copying all contents of CF0. After the copy operation is completed, you can remove and insert this compact flash card unit in slot CF0 of either a new router or a replacement router for a failed unit. When the new or replacement router is rebooted, it uses the configuration from the compact flash card as the running and startup configuration. This functionality enables you to quickly configure new or replacement routers with a standard configuration with little or no manual configuration required.

Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide

 

OL-23421-02

1-9

 

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Cisco Systems, Inc Page N T E N T S Other Management Options Preface PurposeDocument Conventions Related Publications Obtaining Documentation and Submitting a Service RequestGRWIC-D-ES-2S-8PC Switch ModelsMode Description Product OverviewPort Locations PortsPort Label Port Labeling10/100BASE-T Ports PoE and PoE+ PortsPort Description 10/100 Mb/s SFP Module Slots 100/1000 Mb/s SFP Module SlotsDual-Purpose Gigabit Ethernet Ports Type of SFP Module Model Supported SFPsSYS LEDsPoE Router Compact Flash Memory Cards Label on Cisco IOS Router Description Interface Name CF1CF0 Installation Pre-InstallationInstallation Warning Statements Installation Removing the Slot Divider From the CGR 2010 Router Installing the Switch Module in the CGR 2010 Router Connecting the Copper Switch Module Connecting to the NetworkConnecting the Copper Model to the Network Connecting the Fiber Switch ModuleConnecting the SFP Fiber Model to the Network Removing the Switch ModuleOL-23421-02 Express Setup Express SetupSystem Requirements Recessed Express Setup Button Express Setup Window Vlan ID Field DescriptionTroubleshooting Express Setup Resetting the Switch ModuleProblem Resolution Follow the steps in Express Setup, Managing the Switch Module Using the Device ManagerCisco Configuration Professional Method Status Protocol Accessing the Switch ModuleOther Management Options Interface IP AddressDisconnecting from the Switch Module Command PurposePurpose Connecting Devices to the Switch Module SFP Module Slots 237941 Dual-Purpose Port with RJ-45 and SFP Connectors 237964 Verifying Port Connectivity Dual-Purpose ConnectorsOL-23421-02 Cable and Connectors Connector SpecificationsSFP Module Connectors Cables and Adapters Dual-Purpose PortsSFP Module Cables Extended temperature SFPs Core Modal WavelengthCommercial SFPs Cable Pinouts Bandwidth Type of SFP Module Nanometers Fiber TypeMHz/km1 Cable Distance Figure A-6 OL-23421-02
Top Page Image Contents