Cisco Systems OL-23421-02 manual Other Management Options, Accessing the Switch Module

Page 32

Chapter 4 Managing the Switch Module

Other Management Options

Note You must be a registered Cisco.com user, but you need no other access privileges.

Step 2 Click Download Software.

Step 3 Select the latest release of the Configuration Professional installer, and click Download.

Note Cisco Configuration Professional 2.5 or later is supported on the switch module.

Step 4 Run the Configuration Professional installer, and follow the directions.

Step 5 Click Finish to complete the installation.

See the Configuration Professional Getting Started Guide and online help for more information.

Other Management Options

You can use SNMP management applications such as CiscoWorks LAN Management Solution (LMS) and Cisco netManager to configure and manage the switch module. You also can manage the switch module from an SNMP-compatible workstation that is running platforms such as Cisco netManager or SunNet Manager.

The Cisco Configuration Engine is a network management device that works with embedded Cisco Networking Services (CNS) agents in the switch software. You can use it to automate initial configurations and configuration updates on the switch.

Accessing the Switch Module

Note The Cisco CGR 2010 router must be running Cisco IOS Release 15.1(4)M or higher to run the switch module.

After the Ethernet switch module is installed on the router, you see a new Gigabit Ethernet interface 0/x/0 (where x is the slot number) recognized by the Cisco IOS. The output shown in Table 6 is taken after two Ethernet switch modules are installed on the router:

Router1#show ip interface brief

Table 4-1

Output for Gigabit Ethernet Interface Recognized on the Ethernet Switch Module

 

 

 

 

 

 

 

Interface

 

IP Address

OK?

Method

Status

Protocol

 

 

 

 

 

 

GigabitEthernet0/0

60.60.60.1

YES

NVRAM

down

down

 

 

 

 

 

 

GigabitEthernet0/1

80.80.80.1

YES

manual

up

up

 

 

 

 

 

 

GigabitEthernet0/0/0

100.0.0.1

YES

manual

up

up

 

 

 

 

 

 

GigabitEthernet0/2/0

200.0.0.1

YES

NVRAM

up

up

 

 

 

 

 

 

 

Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide

4-2

OL-23421-02

 

 

Image 32
Contents Cisco Systems, Inc Page N T E N T S Other Management Options Document Conventions PrefacePurpose Obtaining Documentation and Submitting a Service Request Related PublicationsSwitch Models Mode DescriptionProduct Overview GRWIC-D-ES-2S-8PCPorts Port LocationsPort Labeling Port LabelPort Description 10/100BASE-T PortsPoE and PoE+ Ports Dual-Purpose Gigabit Ethernet Ports 10/100 Mb/s SFP Module Slots100/1000 Mb/s SFP Module Slots Supported SFPs Type of SFP Module ModelLEDs SYSPoE Router Compact Flash Memory Cards CF0 Label on Cisco IOS Router Description Interface NameCF1 Installation Warning Statements InstallationPre-Installation Installation Removing the Slot Divider From the CGR 2010 Router Installing the Switch Module in the CGR 2010 Router Connecting to the Network Connecting the Copper Switch ModuleConnecting the Fiber Switch Module Connecting the Copper Model to the NetworkRemoving the Switch Module Connecting the SFP Fiber Model to the NetworkOL-23421-02 System Requirements Express SetupExpress Setup Recessed Express Setup Button Express Setup Window Field Description Vlan IDProblem Resolution Troubleshooting Express SetupResetting the Switch Module Follow the steps in Express Setup, Cisco Configuration Professional Managing the Switch ModuleUsing the Device Manager Accessing the Switch Module Other Management OptionsInterface IP Address Method Status ProtocolPurpose Disconnecting from the Switch ModuleCommand Purpose Connecting Devices to the Switch Module SFP Module Slots 237941 Dual-Purpose Port with RJ-45 and SFP Connectors 237964 Dual-Purpose Connectors Verifying Port ConnectivityOL-23421-02 SFP Module Connectors Cable and ConnectorsConnector Specifications SFP Module Cables Cables and AdaptersDual-Purpose Ports Commercial SFPs Extended temperature SFPsCore Modal Wavelength MHz/km1 Cable Distance Cable PinoutsBandwidth Type of SFP Module Nanometers Fiber Type Figure A-6 OL-23421-02