Cisco Systems OL-23421-02 Product Overview, Switch Models, Mode Description, GRWIC-D-ES-2S-8PC

C H A P T E R 1

Product Overview

This chapter describes the Cisco Connected Grid Ethernet Switch Module Interface Card, hereafter referred to as the switch module. The switch deployed together with the Cisco 2010 Connected Grid Router (CGR 2010) offers utilities a rugged networking solution to enable reliable and secure two-way communication for substation automation.

Note The Cisco CGR 2010 router must be running Cisco IOS Release 15.1(4)M or higher to run the switch module.

•Switch Models, page 1-1

•Ports, page 1-2

•LEDs, page 1-7

•Router Compact Flash Memory Cards, page 1-9

Switch Models

Table 1-1 Connected Grid Ethernet Switch Module Interface Card Models

Mode	Description
GRWIC-D-ES-6S (SFP fiber	4		100 Mb/s SFP (small form-factor pluggable) module slots,
model)	1		Gigabit Ethernet (GE) dual-purpose port (1 10/100/1000BASE-T
		port and 1 100/1000 Mb/s SFP module slot), 1 100/1000 M/bs SFP
		module slot.
GRWIC-D-ES-2S-8PC	8		10/100BASE-T ports, 1 GE dual-purpose port
(Copper model)		(1 10/100/1000BASE-T port and 1 100/1000 Mb/s SFP module slot),
	1		100/1000 Mb/s SFP module slot.
		Note The first four 10/100BASE-T ports (FE0/1, FE0/2, FE0/3,
				FE0/4) are PoE+1 ports.

1. PoE+ = Power over Ethernet plus (provides up to 30 W per port).

Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide

OL-23421-02 1-1