Cisco Systems OL-23421-02 manual Connecting Devices to the Switch Module, 10/100BASE-T Ports

Page 34

Chapter 4 Managing the Switch Module

Connecting Devices to the Switch Module

 

Command

Purpose

 

 

 

Step 3

Switch# <Ctrl+Shift+6> x

Press <Ctrl+Shift+6>, then press x.

 

 

This sequence returns you to the router console while keeping the

 

 

console session to the switch module intact and then exits the

 

 

console session to the switch module.

 

 

 

Step 4

Router# disconnect

Terminates the console session to the switch module.

 

 

 

Step 5

Router# <Enter>

Press Enter to confirm the disconnect.

 

 

 

Step 6

Router# service-module

Displays the status of all the vital components of the switch

 

gigabitethernet 0/0/0 status

module. For example output, see the “Service-Module Command

 

 

Syntax” section in Chapter 3, “Accessing the Switch Module

 

 

From the Host Router” in the Cisco 2010 Connected Grid

 

 

Ethernet Switch Module Interface Card Software Configuration

 

 

Guide.

 

 

 

Connecting Devices to the Switch Module

This section describes how to connect various devices to the switch module ports.

Tip If you cannot reach the bale-clasp handle with your fingers when removing RJ-45 or SFP cables from the switch module, use the straight tool provided to gently release the bale-clasp handle.

•10/100BASE-T Ports, page 4-4

•SFP Module Slots, page 4-5

•Dual-Purpose Port with RJ-45 and SFP Connectors, page 4-7

•Dual-Purpose Port with RJ-45 and SFP Connectors, page 4-7

10/100BASE-T Ports

Follow these steps to connect to the 10/100BASE-T ports:

Step 1 When you connect to servers, workstations, IP phones, wireless access points, and routers, use a straight-through, twisted four-pair, Category 5 cable to connect to the 10/100BASE-T RJ-45 connector. Use a crossover, twisted four-pair, Category 5 cable when you connect to other switches, hubs, or repeaters.

Note The first four 10/100BASE-T ports on the GRWIC-D-ES-2S-8PC switch module have PoE+ capability. See the Cisco Connected Grid Ethernet Switch Module Interface Card Software Configuration Guide for more information.

Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide

4-4

OL-23421-02

 

 

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Cisco Systems, Inc Page N T E N T S Other Management Options Purpose PrefaceDocument Conventions Obtaining Documentation and Submitting a Service Request Related PublicationsProduct Overview Switch ModelsMode Description GRWIC-D-ES-2S-8PCPorts Port LocationsPort Labeling Port LabelPoE and PoE+ Ports 10/100BASE-T PortsPort Description 100/1000 Mb/s SFP Module Slots 10/100 Mb/s SFP Module SlotsDual-Purpose Gigabit Ethernet Ports Supported SFPs Type of SFP Module ModelLEDs SYSPoE Router Compact Flash Memory Cards CF1 Label on Cisco IOS Router Description Interface NameCF0 Pre-Installation InstallationInstallation Warning Statements Installation Removing the Slot Divider From the CGR 2010 Router Installing the Switch Module in the CGR 2010 Router Connecting to the Network Connecting the Copper Switch ModuleConnecting the Fiber Switch Module Connecting the Copper Model to the NetworkRemoving the Switch Module Connecting the SFP Fiber Model to the NetworkOL-23421-02 Express Setup Express SetupSystem Requirements Recessed Express Setup Button Express Setup Window Field Description Vlan IDResetting the Switch Module Troubleshooting Express SetupProblem Resolution Follow the steps in Express Setup, Using the Device Manager Managing the Switch ModuleCisco Configuration Professional Interface IP Address Accessing the Switch ModuleOther Management Options Method Status ProtocolCommand Purpose Disconnecting from the Switch ModulePurpose Connecting Devices to the Switch Module SFP Module Slots 237941 Dual-Purpose Port with RJ-45 and SFP Connectors 237964 Dual-Purpose Connectors Verifying Port ConnectivityOL-23421-02 Connector Specifications Cable and ConnectorsSFP Module Connectors Dual-Purpose Ports Cables and AdaptersSFP Module Cables Core Modal Wavelength Extended temperature SFPsCommercial SFPs Bandwidth Type of SFP Module Nanometers Fiber Type Cable PinoutsMHz/km1 Cable Distance Figure A-6 OL-23421-02
Top Page Image Contents