Cisco Systems 12000 series manual Show rom-monitor, Cisco ASR 1000 Series Routers, CF-865

show rom-monitor

show rom-monitor

To show both the ReadOnly and the Upgrade ROM monitor (ROMMON) image versions in addition to which ROMMON image is running on the Cisco 7200 VXR or Cisco 7301 router, use the show rom-monitorcommand in user EXEC, privileged EXEC, or diagnostic mode.

Supported Platforms Other than the Cisco ASR1000 Series Routers

show rom-monitor

Cisco ASR 1000 Series Routers

show rom-monitor slot

Syntax Description

Command Modes

slot Specifies the slot that contains the ROMMON. Options include:

•number—the number of the SIP slot that requires the ROMmon upgrade

•F0—Embedded-Service-Processor slot 0

•F1—Embedded-Service-Processor slot 1

•FP—All installed Embedded-Service-Processors

•R0—Route-Processor slot 0

•R1—Route-Processor slot 1

•rp active—active Route-Processor

•rp standby—standby Route-Processor

•fp active—active Embedded-Service-Processor

•fp standby—standby Embedded-Service-Processor

User EXEC (>)

Privileged EXEC (#)

Diagnostic (diag)

Command History	Release	Modification
	12.0(28)S	This command was introduced on the Cisco 7200 VXR router.
	12.3(9)	This command was integrated into Cisco IOS Release 12.3(9) and
		implemented on the Cisco 7301 router.
	12.3(8)T	This command was integrated into Cisco IOS Release 12.3(8)T.

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-865