show version
Copyright (c)
Compiled Wed
Image
ROM:System Bootstrap, Version 12.0(15)SC, RELEASE SOFTWARE
VXR1 uptime is 2 days, 1 hour, 24 minutes
System returned to ROM by
System restarted at 11:01:08 PST Sat Feb 5 2000
System image file is
cisco uBR7246VXR (NPE300) processor (revision B) with 122880K/40960K bytes of memory. Processor board ID SAB0329005N
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache 6 slot VXR midplane, Version 2.0
Last reset from
X.25 software, Version 3.0.0. National clock card with T1 controller 1 FastEthernet/IEEE 802.3 interface(s) 2 Cable Modem network interface(s)
125K bytes of non-volatile configuration memory.
16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K). 4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x0
Router#
Table 148 describes significant fields shown in these displays.
Table 148 show version Field Descriptions
Field | Description |
|
|
IOS (tm) 7200 Software | Always specify the complete version number when reporting a |
possible software problem. In the example, the version number | |
| is Cisco IOS Release 12.1(10)EC. |
|
|
ROM: System Bootstrap | Bootstrap version string. |
|
|
Router uptime is | The amount of time the system has been up and running. |
|
|
System restarted at | Also displayed is a log of how the system was last booted, as a |
| result of normal system startup or system error. |
|
|
System image file is | If the software was booted over the network, the Internet |
| address of the boot host is shown. If the software was loaded |
| from onboard ROM, this line reads “running default software.” |
|
|
cisco uBR7246VXR (NPE300) | The remaining output in each display shows the hardware |
processor | configuration and any nonstandard software options. |
|
|
Configuration register is | The configuration register contents, displayed in hexadecimal |
| notation. |
|
|
The output of the show version command can also provide certain messages, such as bus error messages. If such error messages appear, report the complete text of this message to your technical support specialist.
|
| Cisco IOS Configuration Fundamentals Command Reference |
|
|
|
|
|
| |||
| July 2008 |
|
|
|
|
|
|
|
|