Cisco Systems 12000 series manual Show msfc, CF-772

show msfc

show msfc

To display Multilayer Switching Feature Card (MSFC) information, use the show msfc command in user EXEC or privileged EXEC mode.

show msfc {buffers eeprom fault netint tlb}

Syntax Description	buffers	Displays buffer-allocation information.
	eeprom	Displays the internal information.
	fault	Displays fault information.
	netint	Displays network-interrupt information.
	tlb	Displays information about the TLB registers.

Defaults

Command Modes

Command History

This command has no default settings.

User EXEC

Privileged EXEC

Release	Modification
12.2(14)SX	Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB	Support for this command on the Supervisor Engine 2 was extended to
	Release 12.2(17d)SXB.
12.2(33)SRA	This command was integrated into Cisco IOS Release 12.2(33)SRA.

Examples			These examples display the show msfc command output:
			Router# show msfc buffers
			Reg. set		Min		Max
			TX				640
			ABQ		640	16384
		0			0		40
		1			6715	8192
		2			0		0
		3			0		0
		4			0		0
		5			0		0
		6			0		0
		7			0		0
			Threshold = 8192
			Vlan	Sel	Min	Max	Cnt	Rsvd
		1016		1 6715		8192	0	0
			Router#
			Router# show msfc eeprom
			Cisco IOS Configuration Fundamentals Command Reference
	CF-772							July 2008