Cisco Systems 12000 series Embedded Syslog Manager ESM feature, CF-693, Router# show logging

			show logging
		If debugging is enabled (using any debug command), and the logging buffer is configured to include
		level 7 (debugging) messages, debug output will be included in the system log. Debugging output is not
		formatted like system error messages and will not be preceded by the percent symbol (%).
		The following is sample output from the show logging command on a software image that supports the
Examples
		Embedded Syslog Manager (ESM) feature:
		Router# show logging
		Syslog logging: enabled (10 messages dropped, 5 messages rate-limited,
		0 flushes, 0 overruns, xml disabled, filtering disabled)
		Console logging: level debugging, 31 messages logged, xml disabled,
		filtering disabled
		Monitor logging: disabled
		Buffer logging: level errors, 36 messages logged, xml disabled,
		filtering disabled
		Logging Exception size (8192 bytes)
		Count and timestamp logging messages: disabled
		No active filter modules.
		Trap logging: level informational, 45 message lines logged
		Log Buffer (8192 bytes):
		The following example shows output from the show logging command after a message discriminator has
		been configured. Included in this example is the command to configure the message discriminator.
		c7200-3(config)#logging discriminator ATTFLTR1 severity includes 1,2,5 rate-limit 100
		Specified MD by the name ATTFLTR1 is not found.
		Adding new MD instance with specified MD attribute values.
		Router(config)# end
		Router#
		000036: *Oct 20 16:26:04.570: %SYS-5-CONFIG_I: Configured from console by console
		Router# show logging
		Syslog logging: enabled (11 messages dropped, 0 messages rate-limited,
		0 flushes, 0 overruns, xml disabled, filtering disabled)
		No Active Message Discriminator.
		Inactive Message Discriminator:
		ATTFLTR1 severity group includes 1,2,5
		rate-limit not to exceed 100 messages per second
		Console logging: level debugging, 25 messages logged, xml disabled, filtering disabled
		Monitor logging: level debugging, 0 messages logged, xml disabled, filtering disabled
		Buffer logging: level debugging, 25 messages logged, xml disabled, filtering disabled
		Logging Exception size (8192 bytes)
		Count and timestamp logging messages: disabled
		No active filter modules.
		Trap logging: level debugging, 28 message lines logged
		Logging to 172.25.126.15 (udp port 1300, audit disabled, authentication disabled,
		encryption disabled, link up),
		Cisco IOS Configuration Fundamentals Command Reference
	July 2008			CF-693