Cisco Systems 12000 series specifications ATM Line Card Installation and Configuration, Contents

ATM Line Card Installation and Configuration

This hardware installation and configuration note contains instructions for installing, configuring, and troubleshooting Asynchronous Transfer Mode (ATM) line cards on supported Cisco 12000 series routers.

Contents

This installation and configuration note includes the following sections:

•Important Information, page 1

•Product Overviews, page 4

•Preparing for Installation, page 7

•Removing and Installing a Line Card, page 8

•Line Card Cable-Management Bracket, page 17

•Cabling and Specifications, page 22

•Verifying and Troubleshooting Line Card Installation, page 26

•Configuring and Troubleshooting Interfaces, page 32

•Line Card Memory, page 43

•Regulatory, Compliance, and Safety Information, page 59

•Obtaining Documentation, page 62

Important Information

This section contains important information about the following:

•ATM Line Card Product Numbers, page 2

•Router Hardware Installation, page 2

•Cisco IOS Software Release Requirements, page 2

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

© 2007 Cisco Systems, Inc. All rights reserved.