Removing and Installing a Line Card
To ensure that there is adequate space for the ATM line card, tighten the captive installation screws on the blank filler before you insert the line card.
Caution Use the captive screws to prevent accidental removal and provide proper grounding and EMI shielding for the router.
Figure 8 | Fastening Captive Screw on Blank Filler |
| EJECT | |
| 0 | 1 |
AUX | RESET | |
CONSOLE |
|
|
LINK |
|
|
TX |
| COLL |
|
| RX |
MII |
|
|
|
| RJ- |
|
| 45 |
GIGABIT ROUTE PROCESSOR |
|
|
CONNECTORCLEAN
LASERPRODUKTPRODUITPRODUCTOCLASS LASERLASER1 LASER DER KLASSEDE CLASSEDE CLASSEPRODUCT 111
A TX INNER RX OUTER
ACTIVE
CARRIERRX
PKT
B TX INNER RX OUTER
ACTIVE
CARRIER
84679
Installing a Line Card
A line card slides into almost any available line card slot and connects directly to the backplane. If you install a new line card, you must first remove the line card blank from the available slot.
Note Refer to the installation and configuration guide for your router for information on line card slot types, slot width, and slot location.
ATM Line Card Installation and Configuration
14 |
| |
|