Cisco Systems 12000 series ATM Line Card Product Numbers, Router Hardware Installation

Important Information

•Hardware Revision Requirements, page 3

•Related Documentation, page 4

ATM Line Card Product Numbers

Table 1 lists the Cisco product numbers to which this publication applies.

Table 1	ATM Line Card Product Numbers
ATM Line Card		Cisco Product Number
1-port OC-12c/STM-4c multimode		LC-1OC12/ATM-MM=
1-port OC-12c/STM-4c single-mode		LC-1OC12/ATM-SM=
4-port OC-3c/STM-1 multimode		4OC3/ATM-MM-SC=
4-port OC-3c/STM-1 intermediate-reach		4OC3/ATM-IR-SC=
4-port OC-12c/STM-4c multimode		4OC12/ATM-MM-SC=
4-port OC-12c/STM-4c intermediate-reach		4OC12/ATM-IR-SC=
8-port OC-3c/STM-1 multimode		8OC03/ATM/TS-MM=
8-port OC-3c/STM-1 intermediate-reach		8OC03/ATM/TS-IR=
4-port OC-3c/STM-1 ISE multimode		4OC3X/ATM-MM-SC=
4-port OC-3c/STM-1 ISE intermediate-reach		4OC3X/ATM-IR-SC=
4-port OC-12c/STM-4c ISE multimode		4OC12X/ATM-MM-SC=
4-port OC-12c/STM-4c ISE intermediate-reach		4OC12X/ATM-IR-SC=

Router Hardware Installation

For hardware installation and configuration information for Cisco 12000 series routers, refer to the installation and configuration guide for your router. The guide includes information on the router switch fabric and its affect on operation of the line card, as well as line card slot locations and other requirements.

Supported Platforms

The ATM line card is supported on all Cisco 12000 series routers.

Note The installation procedure of the 4-port ISE ATM line card in the Cisco 12008 and Cisco 12012 Routers is slightly different than that for other routers in the series. Take note of the differences in the installation sections.

Cisco IOS Software Release Requirements

For software configuration information, refer to the Cisco IOS software configuration and command reference publications for the installed Cisco IOS software release. Also, refer to the Cisco IOS software release notes for additional information.

ATM Line Card Installation and Configuration

2 OL-13004-01