show microcode
show microcode
To display microcode image information available on line cards, use the show microcode command in EXEC mode.
show microcode
Syntax Description This command has no arguments or keywords.
Command Modes
Command History
EXEC
Release | Modification |
10.0 | This command was introduced. |
|
|
12.2(33)SRA | This command was integrated into Cisco IOS Release 12.2(33)SRA. |
|
|
Examples | The following is sample output from the show microcode command: | |||
| Router# show microcode |
| ||
| Microcode bundled in system |
| ||
| Card | Microcode | Target Hardware | Description |
| Type | Version | Version |
|
| ||||
| SP | 2.3 | 11.x | SP version 2.3 |
| EIP | 1.1 | 1.x | EIP version 1.1 |
| TRIP | 1.2 | 1.x | TRIP version 1.2 |
| FIP | 1.4 | 2.x | FIP version 1.4 |
| HIP | 1.1 | 1.x | HIP version 1.1 |
| SIP | 1.1 | 1.x | SIP version 1.1 |
| FSIP | 1.1 | 1.x | FSIP version 1.1 |
In the following example for the Cisco 7200 series router, the output from the show microcode command lists the hardware types that support microcode download. For each type, the default microcode image name is displayed. If there is a configured default override, that name also is displayed.
router# show microcode
Microcode images for downloadable hardware
HW TypeMicrocode image names
ecpa default
pcpa default
| Cisco IOS Configuration Fundamentals Command Reference |
| July 2008 |