Cisco Systems 12000 series Show logging history, Be written to the logging history table, CF-700

show logging history

show logging history

To display information about the state of the syslog history table, use the show logging history command in privileged EXEC mode.

show logging history

Syntax Description This command has no arguments or keywords.

Command Modes

Command History

Privileged EXEC

Release	Modification
10.0	This command was introduced.
12.2(33)SRA	This command was integrated into Cisco IOS Release 12.2(33)SRA.

Usage Guidelines This command displays information about the syslog history table, such as the table size, the status of messages, and text of messages stored in the table. Messages stored in the table are governed by the logging history global configuration command.

Examples	The following example shows sample output from the show logging history command. In this example,
	notifications of severity level 5 (notifications) through severity level 0 (emergencies) are configured to
	be written to the logging history table.
	Router# show logging history
	Syslog History Table: 1 maximum table entries,
	saving level notifications or higher
	0 messages ignored, 0 dropped, 15 table entries flushed,
	SNMP notifications not enabled
	entry number 16: SYS-5-CONFIG_I
	Configured from console by console
	timestamp: 1110
	Router#

Table 94 describes the significant fields shown in the output.

		Table 94	show logging history Field Descriptions
		Field		Description
		maximum table entry		Number of messages that can be stored in the history table.
				Set with the logging history size command.
		saving level notifications <x> or		Level of messages that are stored in the history table and sent
		higher		to the SNMP server (if SNMP notification is enabled). The
				severity level can be configured with the logging history
				command.
	Cisco IOS Configuration Fundamentals Command Reference
CF-700				July 2008