Cisco Systems 12000 series manual When you are in Rommon mode, CF-866, Router show rom-monitor

show rom-monitor

		Release	Modification
		12.2SX	This command is supported in the Cisco IOS Release 12.2SX train. Support
			in a specific 12.2SX release of this train depends on your feature set,
			platform, and platform hardware.
		Cisco IOS XE Release	This command was introduced on the Cisco ASR1000 Series Routers and the
	2.1		following enhancements were introduced:
			• This command was introduced in diagnostic mode for the first time. The
			command can be entered in both privileged EXEC and diagnostic mode
			on the Cisco ASR1000 Series Routers.
			• The slot keyword was introduced.
		Use the show rom-monitorcommand when you are in Cisco IOS software. Use the showmon command
Usage Guidelines
		when you are in ROMMON mode.
		The following sample output from the show rom-monitorcommand in Cisco IOS software, applicable
Examples

to both the Cisco 7200 VXR and Cisco 7301 routers, displays both ROMMON images and verifies that the Upgrade ROMMON image is running:

Router> show rom-monitor

ReadOnly ROMMON version:

System Bootstrap, Version 12.2(20031011:151758)

Copyright (c) 2004 by Cisco Systems, Inc.

Upgrade ROMMON version:

System Bootstrap, Version 12.2(20031011:151758)

Copyright (c) 2004 by Cisco Systems, Inc.

Currently running ROMMON from Upgrade region

ROMMON from Upgrade region is selected for next boot

In the following example, the ROMmon image in RP 0 of a Cisco ASR 1006 Router is verified using the show rom-monitorcommand:

Router# show rom-monitor r0

System Bootstrap, Version 12.2(33r)XN1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2007 by cisco Systems, Inc.

	Cisco IOS Configuration Fundamentals Command Reference
CF-866	July 2008