Cisco Systems PAP2 Enter the IP, Address using, Numbers on, Invalid Option, if you try to set a

Page 18

Phone Adapter with 2 Ports for Voice-over-IP

Interactive Voice Response Menu

Action	Command	Choices	Description
	(press these
	keys on the
	telephone)

Set Static IP Address	111	Enter the IP	To set a static IP address, the DHCP
		address using	feature must be disabled. If the DHCP
		numbers on the	feature is enabled, then you will hear,
		telephone keypad.	“Invalid Option,” if you try to set a
		Use the * (star) key	static IP address.
		when entering a
		decimal point.

Check Network Mask	120		You will hear the current network
(or Subnet Mask)			mask of the Phone Adapter.

Set Network Mask (or	121	Enter the network	To set the network mask, the DHCP
Subnet Mask)		mask using	feature must be disabled. If the DHCP
		numbers on the	feature is enabled, then you will hear,
		telephone keypad.	“Invalid Option,” if you try to set the
		Use the * (star) key	network mask.
		when entering a
		decimal point.

Check Static Gateway	130		You will hear the current gateway IP
IP Address			address of the Phone Adapter.

12			Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu
				Using the Interactive Voice Response Menu

Image 18

Contents Phone Adapter Page How to Use this Guide Copyright and TrademarksPhone Adapter with 2 Ports for Voice-over-IP Table of Contents Back Panel Front PanelIntroduction WelcomeWhat’s in this Guide? Introduction Getting to Know the Phone Adapter Back Panel PortsIncoming call has been detected Front PanelPhone Adapter’s LEDs are located on the front panel An incoming call has been detectedOverview Connecting the Phone AdapterInstructions for Connecting the Phone Adapter InternetFollow the instructions provided by Vonage Connect the Telephone CableRemove the plate from the Phone Adapter’s bottom panel Placement OptionsStand Option Phone Adapter’s Interactive Voice Response MenuWall-Mount Option Measurement between Wall-Mount SlotsUsing the Phone Adapter’s Interactive Voice Response Menu Accessing the Interactive Voice Response MenuUsing the Interactive Voice Response Menu Not press any other keys until you Use this command to enter Response MenuInteractive Voice Response Menu Key or hang up to exitEnter 0 to disable Has been enabled or disabled. If101 Enter 1 to enable Check Dhcp 100Subnet Mask Mask using Address usingStatic IP address When entering a Decimal point Network mask When entering a Decimal pointPhone Adapter Manual Reboot 732668 Address Address usingStatic gateway IP address When entering a Decimal point 131 Enter the IPConfiguring the Settings for Your Internet Phone Service Appendix a Troubleshooting Common Problems and SolutionsAppendix a Troubleshooting IP address Phone Adapter Internet phone 53 to Application Start and End Protocol IP Address EnableInternet phone 5060 to IP address Phone Adapter Internet phone 69 toPhone Adapter with 2 Ports for Voice-over-IP Application Start and End Protocol IP Address Enable Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Application Start and End Protocol IP Address Enable Frequently Asked Questions Ethernet LED does not light upCan I make calls while I’m browsing the Internet? Appendix B Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix B Windows Help Appendix C Glossary Appendix C Glossary Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Appendix D Specifications Dimensions 98 x 3.98 x H x D Storage Humidity ~90% Non-CondensingMm x 101 mm x 15 mm Appendix E Warranty Information Limited WarrantyAppendix E Warranty Information Appendix F Regulatory Information FCC StatementAppendix F Regulatory Information Vonage LinksysToll-free from US