Chapter 3 MIB Specifications
CISCO-FLASH-MIB
CISCO-FLASH-MIB
The CISCO-FLASH-MIB contains objects to manage flash cards and flash-card operations.
CISCO-FRAME-RELAY-MIB
The CISCO-FRAME-RELAY-MIB contains Frame Relay information that is specific to Cisco products or that is missing from RFC 1315.
CISCO-FRAS-HOST-MIB
The CISCO-FRAS-HOST-MIB contains objects specific to upstream or host-end sessions.
CISCO-FTP-CLIENT-MIB
The CISCO-FTP-CLIENT-MIB contains objects to invoke File Transfer Protocol (FTP) operations for network management.
CISCO-HSRP-EXT-MIB
The CISCO-HSRP-EXT-MIB provides an extension to the CISCO-HSRP-MIB. It contains objects to perform functions such as assigning secondary HSRP IP addresses, monitoring the operational status of interfaces, and modifying an HSRP group’s priority.
Although this MIB is included in the Cisco IOS software image, the MIB is currently not supported for broadband configurations.
CISCO-HSRP-MIB
The CISCO-HSRP-MIB contains objects to configure and manage the Cisco Hot Standby Router Protocol (HSRP), which is defined in RFC 2281.
CISCO-IETF-ATM2-PVCTRAP-MIB
The CISCO-IETF-ATM2-PVCTRAP-MIB supplements the ATM-MIB. It implements the virtual channel link (VCL) section of the IETF document “draft-ietf-atommib-atm2-11.txt,” Section 9 ATM Related Trap Support.
Cisco 7304 Router MIB Specifications Guide
