Chapter 3 MIB Specifications
CISCO-ENTITY-FRU-CONTROL-MIB
Table 3-14 CISCO-ENTITY-EXT-MIB Object Constraints
MIB Object | Notes |
ceExtConfigRegTable | |
ceExtConfigRegNext | Read only. |
ceExtSysBootImageList | Read only. |
| |
Note The CISCO-ENTITY-EXT-MIB is only supported for the physical entities representing active and standby processors.
CISCO-ENTITY-FRU-CONTROL-MIB
The CISCO-ENTITY-FRU-CONTROL-MIB contains objects to configure and monitor the status of field replaceable units (FRUs) on the Cisco 7304 router. An FRU is a hardware component (such as a line card) that can be replaced on site.
Table 3-15lists the constraints that the router places on objects in the CISCO-ENTITY-FRU-CONTROL-MIB. For detailed definitions of MIB objects, see the MIB.
Table 3-15 CISCO-ENTITY-FRU-CONTROL-MIB Constraints
| | MIB Object | Notes |
| | cefcModuleTable | | | | | |
| | • | cefcModuleAdminStatus | Supported values: |
| | | | • | Enable(1) |
| | | | • | Reset(3) |
| | | | Note The cefcModuleAdminStatus object cannot be set |
| | | | | to reset(3) for processor modules. |
| | | | Note When a line card is disabled, its |
| | | | | cefcModuleAdminStatus cannot be set to reset. |
| | • | cefcModuleOperStatus | Supported values: |
| | | | | – Unknown(1)—Read-only. |
| | | | | – Ok(2)—Read-only. |
| | | | | – Failed(7)—Read-only. |
| | • | cefcModuleResetReason | Supported values: |
| | | | | – Unknown(1)—Read-only. |
| | | | | – PowerUp(2)—Read-only. |
| | | | | – ManualReset(5)—Read-only. |
| | | |
| | cefcFRUPowerSupplyGroupTable | Not supported. |
| | | |
| | cefcFRUPowerStatusTable | Not supported. |
| | | | | | | |
| | | | | Cisco 7304 Router MIB Specifications Guide | | |
| | | | | |
| | | | | | | | |
| OL-4925-02 | | | | | 3-21 | |
| | | | | |
