Chapter 3 MIB Specifications
CISCO-NDE-MIB
CISCO-NDE-MIB
The CISCO-NDE-MIB contains objects to configure and monitor the operation of the NetFlow Data Export (NDE) feature. A network flow is a unidirectional sequence of packets between a pair of source and destination endpoints, which are identified by IP address and transport layer application port number. NetFlow uses the IP protocol type, type of service (ToS), and input interface identifier to uniquely identify network flows.
CISCO-NTP-MIB
The CISCO-NTP-MIB contains objects to monitor a Network Time Protocol (NTP) server. NTP is used to synchronize timekeeping among a set of distributed time servers and clients. Primary time servers, which are synchronized to national time standards, are connected to widely accessible resources such as backbone gateways. These primary servers send timekeeping information to other time servers, and perform clock checking to eliminate timekeeping errors due to equipment or propagation failures.
CISCO-PAE-MIB
The CISCO-PAE-MIB contains objects to manage port access entities (PAEs) on the router, as defined by IEEE Std 802.1x. The MIB contains PAE information that is not included in the IEEE8021-PAE-MIB or that is specific to Cisco products.
CISCO-PIM-MIB
The CISCO-PIM-MIB defines Cisco specific objects and variables for managing Protocol Independent Multicast (PIM) on the router. These MIB definitions are an extension of those in RFC 2934, which is the IETF-PIM-MIB.
CISCO-PING-MIB
The CISCO-PING-MIB contains objects to manage ping requests on the router. There are no constraints on this MIB.
CISCO-PROCESS-MIB
The CISCO-PROCESS-MIB displays memory and CPU usage on the router, and describes active system processes.
CISCO-PRODUCTS-MIB
The CISCO-PRODUCTS-MIB lists the object identifiers (OIDs) assigned to Cisco hardware platforms. The cisco7303 = 1.3.6.1.4.1.9.1.439 OID is supported.
Cisco 7304 Router MIB Specifications Guide
