Chapter 3 MIB Specifications
CISCO-ASPP-MIB
CISCO-ASPP-MIB
The CISCO-ASPP MIB provides configuration and operational information on asynchronous polled protocols such as the asynchronous security protocols that alarm-monitoring companies use. The protocols are handled in Pass-through mode. ASPP handles the receiving and sending of asynchronous blocks.
CISCO-ATM-EXT-MIB
The CISCO-ATM-EXT-MIB contains extensions to the Cisco ATM module that are used to manage ATM entities. It provides additional AAL5 performance statistics for a virtual channel connection (VCC) on an ATM interface.
Note There are no constraints on this MIB and the ATM-EXT-MIB has only one table. The cAal5VccExtTable augments the aal5VccTable of the ATM-MIB. The aal5VccTable contains additional AAL5 performance parameters.
CISCO-BCP-MIB
The CISCO-BCP-MIB (based on RFC 2878) (Bridging Control Protocol) contains objects to configure, enable, and disable bridge modules on both ends of point-to-point links. The Cisco 7304 router uses the BCP for transporting Ethernet frames over SONET and DPT networks. The BCP-MIB manages and monitors Bridge Control Protocol configuration and information on subnetwork interfaces using the family of Point-to-Point Protocols.
The CISCO-BCP-MIB contains the following tables:
•bcpOperTable—Describes the current operational status information for a particular link. For all entries in ifTable with ifType ppp(23), there will be an entry in this table.
•bcpConfigTable—Shows the BCP configuration information (for example, the current configuration for spanning tree, line identification option).
Table 3-4lists the constraints that the router places on objects in the CISCO-BCP-MIB. Also see the table of new MIB objects which follows. For detailed definitions of MIB objects, see the MIB.
Table 3-4 CISCO-BCP-MIB Constraints
| | | | MIB Object | Notes |
| | | | bcpOperTable | | | |
| | | | • | bcpOperStatus | Possible values: |
| | | | | | open(1) |
| | | | | | closed (2) |
| | | | | | listening(3) |
| | | | | | | |
| | | | bcpConfigTable | | | |
| | | | • | bcpConfigBridgeIdControl | Read-only. Possible values: enabled(1), disabled(2) |
| | | | • | bcpConfigLineIdControl | Read-only. Possible values: enabled(1), disabled(2) |
| | | | | | | |
| | | Cisco 7304 Router MIB Specifications Guide | | | |
| | | | | |
| | | | | | | | |
| 3-6 | | | | | OL-4925-02 | |
| | | | | |
