Chapter 3 MIB Specifications
SNMP-TARGET-MIB
SNMP-TARGET-MIB
The SNMP-TARGET-MIB (RFC 2573) contains objects to remotely configure the parameters used by an entity to generate SNMP notifications. The MIB defines the addresses of entities to send SNMP notifications to, and contains a list of tag values that are used to filter the notifications sent to these entities (see the SNMP-NOTIFICATION-MIB). There are no constraints on this MIB.
SNMP-USM-MIB
The SNMP-USM-MIB (RFC 2574) contains objects that describe the SNMP User-based Security Model. There are no constraints on this MIB.
SNMP-VACM-MIB
The SNMP-VACM-MIB (RFC 2575) contains objects that describe the view-based access control model for SNMP.
Note To access this MIB, you must create an SNMP v3 user with access to a view that includes all of the information from the Internet subtree. For example:
Router(config)# snmp-server view abcview internet included
Router(config)# snmp-server group abcgroup v3 noauth read abcview write abcview notify abcview
Router(config)# snmp-server user abcuser abcgroup v3
SNMPv2-MIB
The SNMPv2-MIB contains objects SNMPv2 entities. The SNMPv2-MIB contains the following mandatory object groups:
•SNMP group—Collection of objects providing basic instrumentation and control of an SNMP entity.
•System group—Collection of objects common to all managed systems.
•snmpSetGroup—Collection of objects which allow several cooperating SNMPv2 entities, all acting in a manager role, to coordinate their use of the SNMPv2 set operation.
•snmpBasicNotificationsGroup—The two notifications are coldStart and authenticationFailure which an SNMPv2 entity is required to implement.
SONET-MIB
The SONET-MIB (RFC 1595) contains objects to manage both configuration and performance managing objects for SONET interfaces.
Cisco 7304 Router MIB Specifications Guide
