Baracoda LA Baracoda advanced features, Switch on delay, Shutdown timers, Turn scanner OFF

Data Capture for Workforce in Motion

1.2.Baracoda advanced features

1.2.1.Switch on delay

In order to switch on the scanner in its standard mode, you should just press the trigger. You can set up the scanner to be switched on only after keeping the trigger pressed for two (2) seconds by reading the appropriate barcode.

Switch on delay : 2 seconds

Switch on delay : 0 second (*)

1.2.2.Shutdown timers

There are two different ‘shutdown timers’:

-When connected timer: delay between the last scanned barcode and the switch off when the scanner is connected to a host

-Not connected timer: delay between the last scanned barcode and the switch off when the scanner is not connected to any host

It is possible to set those timers to ‘infinite’. In this case, the scanner will stay all the time ON.

Set shutdown timers to infinity

By default, timers value are:

-When connected timer = 20 minutes

- Not connected timer = 10 minutes

Set shutdown timers to defaults

1.2.3.Turn scanner OFF

To turn off the scanner, read the following barcode:

Turn off scanner

RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.3 - 7 -