There are three timers
•Before using the timers, set the clock built in the unit. (See page 13.)
English
2 Press CLOCK/TIMER again.
“TIMER” appears for about 2 seconds, then the unit enters on- time setting mode.
Using Daily Timer
With Daily Timer, you can wake up to your favorite music or radio program.
• You can set the timers whether the unit is on or off.
How Daily Timer actually works
The unit automatically turns on, sets the volume level to the preset level, and starts playing the specified source when the
The Daily Timer works everyday automatically. If you do not want to use the Daily Timer, turn it off. (See “To turn on or off Daily Timer” on page 55.) The timer setting remains in memory until you change it.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•To correct a misentry while setting the timer, press CANCEL/ DEMO.
Before you start...
•When using a disc as the source to play:
–Make sure there is a disc on the selected disc tray.
–The Daily Timer cannot be able to use with JPEG discs.
•When using a tape as the source to play:
–Make sure that a tape is in the cassette deck.
–Make sure that the tape direction is correct.
•When using an external component as the source to play:
–Set the timer equipped on the external component to the same time.
On the front panel ONLY:
1 Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.
The (Timer) indicator lights up and the DAILY (Daily Timer) indicator starts flashing.
•Each time you press the button, the timer setting modes change as follows:
|
| DAILY |
|
|
| TIMER |
|
| REC |
|
|
|
|
|
|
| |||
(Daily Timer on/off) | (Daily Timer setting) | (Recording Timer on/off) | |||||||
|
|
|
|
|
Canceled |
| Clock |
| TIMER |
|
| |||
|
| setting | (Recording Timer setting) |
(The hour digits start flashing.)
3 Set the on-time you want the unit to turn on at.
(1)Turn ¢ / 4 to set the hour, then press SET/DISPLAY.
(2)Turn ¢ / 4 to set the minute, then press SET/DISPLAY. “SET” appears for about 1 second, then the unit enters off- time setting mode.
4 Set the
(1)Turn ¢ / 4 to set the hour, then press SET/DISPLAY.
(2)Turn ¢ / 4 to set the minute, then press SET/DISPLAY.
“SET” appears for about 1 second, then the unit enters source selecting mode.
5 Turn ¢ / 4 to select the source to play, then press SET/DISPLAY.
“SET” appears for about 1 second.
•As you turn ¢ / 4, the source changes as follows:
DISC TAPE AUX IN
TUNER AM TUNER FM
DISC: plays a disc from a track/chapter of a group/ title on specified disc.
=Go to step 6.
TAPE: plays a tape in the cassette deck.
=Go to step 7.
AUX IN: plays an external source.
=Go to step 7.
TUNER FM: tunes in to a specified preset FM station.
=Go to step 6.
TUNER AM: tunes in to a specified preset AM station.
=Go to step 6.
54