JVC GVT0119-001C Changing the Display Brightness, Turning Off the Key-touchTone, Press DIMMER

Changing the Display Brightness

You can dim the display window.

On the remote control ONLY:

Press DIMMER.

•Each time you press the button, the display dims and brightens alternately.

Turning Off the Key-touch Tone

If you do not want the key-touch tone, you can deactivate it.

Press BEEP ON/OFF (or press and hold BEEP on the front panel).

•Each time you press the button, the key-touch tone turns on and off alternately.

When you deactivate the key-touch tone, the BEEP ON indicator goes off from the display.

English

On the remote control:

1 Press LEVEL SELECT repeatedly until “S.WOOFER” appears on the display.

2 Press LEVEL + / –.

•To increase the Subwoofer level, press LEVEL +.

•To decrease the Subwoofer level, press LEVEL –.

On the front panel:

Press SUBWOOFER LEVEL + / –.

The SUBWOOFER indicator lights up when S.WOOFER 1 to S.WOOFER 4 is selected. The SUBWOOFER indicator turns off when S.WOOFER 0 is selected (no effect).

If you press SUBWOOFER LEVEL + / – during activating Sound Turbo

Sound Turbo is canceled.

While connecting a pair of headphones

The Subwoofer level adjustment will be invalid.

Adjusting the Front Speaker Output Balance

You can adjust the output balance of left front speaker and right front speaker.

On the remote control ONLY:

1 Press LEVEL SELECT repeatedly until “L/R” appears on the display.

2 Press LEVEL + / –.

Adjust the output balance appropriately from the listening point within the range of R (Right) –6 (minimum sound level from the right speaker) to L (Left) –6 (minimum sound level from the left speaker).

Reinforcing the Bass Sound

These function only affect the playback sound, but does not affect your recording.

7To enjoy heavy sound

You can enjoy heavy sound by using Sound Turbo. This function boosts the low and high frequency sound.

•Activating Sound Turbo cancels the Sound mode and/or Subwoofer level adjustment.

Press SOUND TURBO.

The SOUND TURBO indicator lights up on the display. The Subwoofer level increases to the maximum level (S.WOOFER 4).

•Each time you press SOUND TURBO, Sound Turbo is turned on (S.WOOFER 4) or off (S.WOOFER 1).

7To change the Subwoofer level precisely

You can select one of the 5 Subwoofer levels—S.WOOFER 0 (MIN LEVEL), S.WOOFER 1 through S.WOOFER 4 (MAX LEVEL).

Selecting the Sound Modes

You can select one of the 3 preset SEA—Sound Effect Amplifier— modes and 3 user modes. This function only affects the playback sound (front left and right channel only), but does not affect your recording.

Press SOUND MODE repeatedly until the preferred sound mode appears on the display.

•When one of the Sound modes is selected, the SOUND MODE lamp flashes.

R E C SOUND MODE D A N C E H A L L S T A D I U M

SOUND MODE lamp

•Each time you press SOUND MODE, the Sound modes change as follows:

ROCK POP CLASSIC

FLAT USER 3 USER 2 USER 1

(Canceled)

When you press SOUND MODE once

You can confirm the Sound mode currently chosen.

SEA (Sound Effect Amplifier) modes

ROCK: Boosts low and high frequency. Good for acoustic music.

POP: Good for vocal music.

CLASSIC: Good for classical music.

User modes

USER 1/2/3: Your individual mode stored in memory. See “Creating Your Own Sound Mode—User Mode” on page 17.

FLAT: The Sound mode is canceled.

While Sound Turbo is activated

The Sound mode is canceled.

16