Cisco Systems RSP8 manual Obtaining Documentation, Using Flash Memory, Cisco.com

Obtaining Documentation

The config-reg 0x2102 command, with the hexadecimal value 0x2102, results in the following:

•Enables the system to boot the default boot ROM software if the Flash Disk-based image fails to boot—hexadecimal value 0x2000

•Disables Break—hexadecimal value 0x0100

•Enables the image myfile as the default boot image—hexadecimal value 0x0002

Step 3 Press Ctrl-Zor type end to exit global configuration mode:

System(config)#

System(config)# end

System#

Step 4 Save the new configuration to NVRAM by using the copy running-configstartup-configcommand as follows:

System# copy running-config startup-config

Using Flash Memory

The Flash memory (PC Card) slots on the front panel of the RSP8 support PC Card-based Flash memory media for your system. You can use this Flash memory to store and run IOS software images, or as a file server for other routers to access as clients. The Flash memory media is either Flash memory cards or Flash Disks.

Note A complete discussion of PC Card-based Flash memory is beyond the scope of this publication. For detailed information on Flash memory cards, refer to Flash Memory Card Installation Instructions (Part Number: DOC-782083=). Or, for detailed information on Flash Disk, refer to Using the Flash Disk (Part Number DOC-785819=).

Obtaining Documentation

Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml

Route Switch Processor (RSP8) Installation and Configuration Guide

88 OL-4920-02