Billion Electric Company 7100S user manual Configuring PC in Windows NT4.0

Page 17

Chapter 3 Configuration

Configuring PC in Windows NT4.0

1.Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Protocols tab.

2.Select TCP/IP Protocol and click Properties.

13

Image 17

Contents Bipac 7100S Page Table of Contents Appendix An Overview of Bipac 7100S Chapter IntroductionBipac 7100S Features Package ContentsIntroduction Bipac 7100S ApplicationLit green when the LAN link is connected Lit green when power adapter is connectedFlashes green when collision happens Front LEDsRear Ports Line RJ-11 connector Reset LAN RJ-45 connectorCabling Through Ethernet PortBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows XP Before ConfigurationBillion Bipac 7100S Adsl Modem/Router Configuration Configuring PC in WindowsBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings LAN Port WAN Port IP address Information from ISPDhcp server function IP addresses forConfiguring with Web Browser Quick Start StatusAdsl Status WAN Status Status Adsl StatusAdsl Status ATM Status Status LAN StatusLAN Status TCP Status Status- PPP StatusRouting Table Status- Learned MAC TableSecurity Logs System LogSelect Adapter 3.1 WANBillion Bipac 7100S Adsl Modem/Router ATM MAC Spoofing Service Category Select UBR or CBR Dhcp ClientStatic IP Settings Device IP Address 3.2 LANSystem PasswordTime Zone Factory Setting UpgradeRestart Packet Filter FirewallConfiguration Intrusion Detection Bridge FilteringSnork Attack UDP port loop-back TCP Null scan Block WAN RequestURL Blocking VPN Virtual Private Networks Billion Bipac 7100S Adsl Modem/Router Virtual Server 3.7.2 DNS AdvancedAdsl Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Snmp Static Routing Diagnostic Test Misc ConfigurationTest ATM OAM Segment Loop Back Testing Ethernet LAN connectionTesting Adsl Synchronization Test IP connect to PPP Test ATM OAM End-to-End Loop BackTest Ethernet connect to ATM Save Config Problems with the WAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISPContact Billion Appendix