Billion Electric Company 7100S user manual System, Password

Page 32

Billion BIPAC 7100S ADSL Modem/Router

With this case, the DHCP pool is from 192.168.1.100 to 192.168.1.199. Therefore, the local computer will get an IP address located at this range randomly.

Lease Time: Set the lease time you required.

User Mode: There are two selections, Single User and Multi-User, for this setting.

3.4.3.3 System

There are five items under the System section: Password, Time Zone, Upgrade, Factory Setting and Restart.

3.4.3.3.1 Password

In factory setting, the default password is password, and that for user is also password. You can change the default password to ensure that someone cannot adjust your settings without your permission. Every time you change your password, please record the password and keep it at a safe place.

Please note that the minimum input for password is 8 alphanumeric characters long. Since it is case sensitive, be sure that you remember whether a letter is in upper or lower case and make sure that your Caps Lock is off. Moreover, please do not use the sign “&” in the passwords.

28

Image 32

Contents Bipac 7100S Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SPackage Contents Bipac 7100S FeaturesBipac 7100S Application IntroductionLit green when power adapter is connected Lit green when the LAN link is connectedFlashes green when collision happens Front LEDsLine RJ-11 connector Reset LAN RJ-45 connector Rear PortsCabling Through Ethernet PortBillion Bipac 7100S Adsl Modem/Router Before Configuration Configuring PC in Windows XPBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows ConfigurationBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Information from ISP LAN Port WAN Port IP addressDhcp server function IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN StatusStatus LAN Status Adsl Status ATM StatusStatus- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs3.1 WAN Select AdapterBillion Bipac 7100S Adsl Modem/Router ATM MAC Spoofing Service Category Select UBR or CBR Dhcp ClientStatic IP Settings 3.2 LAN Device IP AddressPassword SystemTime Zone Upgrade Factory SettingRestart Firewall Packet FilterConfiguration Bridge Filtering Intrusion DetectionBlock WAN Request Snork Attack UDP port loop-back TCP Null scanURL Blocking VPN Virtual Private Networks Billion Bipac 7100S Adsl Modem/Router Virtual Server 3.7.2 DNS AdvancedAdsl Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Snmp Static Routing Misc Configuration Diagnostic TestTest ATM OAM Segment Loop Back Testing Ethernet LAN connectionTesting Adsl Synchronization Test IP connect to PPP Test ATM OAM End-to-End Loop BackTest Ethernet connect to ATM Save Config Problems Starting Up the Adsl Router Corrective Action Problems with the WAN Interface Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion