Billion Electric Company 7100S Front LEDs, Meaning, Lit green when power adapter is connected

Page 8

Chapter 2

Using Billion ADSL Modem/Router

2.1 Cautions for Using Billion ADSL Modem/Router

Do not place the router under high humidity and high temperature.

Do not use the same power source for the device with other equipment.

Do not open or repair the case yourself. If the device is too hot, turn off the power immediately and have a qualified serviceman repair it.

Place the product on the stable surface.

Only use the power adapter that comes with the package.

2.2 The Front LEDs

 

 

LED

 

Meaning

 

 

 

 

 

 

 

 

1

PWR

 

Lit green when power adapter is connected.

 

 

 

 

 

 

 

 

2

SYS

 

When flash, it indicates that the device is working properly.

 

 

 

 

 

 

 

 

4

LNK

 

Lit green when the LAN link is connected.

 

 

 

 

 

 

 

 

5

COL

 

Flashes green when collision happens

 

 

 

 

 

 

 

 

7

ADSL

 

When lit, it indicates that the ADSL (Line) port is connected to the DSLAM

 

 

 

and working properly.

 

 

 

 

 

 

 

 

 

 

 

 

4

Image 8
Contents Bipac 7100S Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SPackage Contents Bipac 7100S FeaturesBipac 7100S Application IntroductionLit green when power adapter is connected Lit green when the LAN link is connectedFlashes green when collision happens Front LEDsLine RJ-11 connector Reset LAN RJ-45 connector Rear PortsCabling Through Ethernet PortBillion Bipac 7100S Adsl Modem/Router Before Configuration Configuring PC in Windows XPBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows ConfigurationBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Information from ISP LAN Port WAN Port IP addressDhcp server function IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN StatusStatus LAN Status Adsl Status ATM StatusStatus- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs3.1 WAN Select AdapterBillion Bipac 7100S Adsl Modem/Router ATM MAC Spoofing Service Category Select UBR or CBR Dhcp ClientStatic IP Settings 3.2 LAN Device IP AddressPassword SystemTime Zone Upgrade Factory SettingRestart Firewall Packet FilterConfiguration Bridge Filtering Intrusion DetectionBlock WAN Request Snork Attack UDP port loop-back TCP Null scanURL Blocking VPN Virtual Private Networks Billion Bipac 7100S Adsl Modem/Router Virtual Server 3.7.2 DNS AdvancedAdsl Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Snmp Static Routing Misc Configuration Diagnostic TestTest ATM OAM Segment Loop Back Testing Ethernet LAN connectionTesting Adsl Synchronization Test IP connect to PPP Test ATM OAM End-to-End Loop BackTest Ethernet connect to ATM Save Config Problems Starting Up the Adsl Router Corrective Action Problems with the WAN Interface Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion