Billion Electric Company 7100S user manual Factory Default Settings

Page 18

Billion BIPAC 7100S ADSL Modem/Router

3.Select the Obtain an IP address from a DHCP server radio button and click OK.

3.2 Factory Default Settings

Before you configure this device, you need to know the following default settings.

1.	Web Configuration
	Password: There are two levels of password protection, Administrator Level and User Level.
			User Name	Password

	Administrator Level		admin	password

	User Level		user	password

2.	Device IP Network settings in LAN site
	IP Address: 192.168.1.254
	Subnet Mask: 255.255.255.0
3.	ISP setting in WAN site
	Virtual Circuit 0: 1483 Routed IP LLC
4.	DHCP server
	DHCP server is enabled.
	IP address pool from IP Address: 192.168.1.100 to IP Address: 192.168.1.199

14

Image 18

Contents Bipac 7100S Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SPackage Contents Bipac 7100S FeaturesBipac 7100S Application IntroductionFlashes green when collision happens Lit green when power adapter is connectedLit green when the LAN link is connected Front LEDsCabling Line RJ-11 connector Reset LAN RJ-45 connectorRear Ports Through Ethernet PortBillion Bipac 7100S Adsl Modem/Router Before Configuration Configuring PC in Windows XPBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows ConfigurationBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Dhcp server function Information from ISPLAN Port WAN Port IP address IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN StatusStatus LAN Status Adsl Status ATM StatusStatus- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs3.1 WAN Select AdapterBillion Bipac 7100S Adsl Modem/Router ATM Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing 3.2 LAN Device IP AddressPassword SystemTime Zone Upgrade Factory SettingRestart Firewall Packet FilterConfiguration Bridge Filtering Intrusion DetectionBlock WAN Request Snork Attack UDP port loop-back TCP Null scanURL Blocking VPN Virtual Private Networks Billion Bipac 7100S Adsl Modem/Router Virtual Server Advanced Adsl3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Snmp Static Routing Misc Configuration Diagnostic TestTesting Ethernet LAN connection Testing Adsl SynchronizationTest ATM OAM Segment Loop Back Test ATM OAM End-to-End Loop Back Test Ethernet connect to ATMTest IP connect to PPP Save Config Problems with the LAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the WAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion