Billion Electric Company user manual Billion Bipac 7100S Adsl Modem/Router

Page 42

Billion BIPAC 7100S ADSL Modem/Router

Remote Subnet Mask: The range of remote IPs can be communicated. For example, it is 255.255.255.0.

Proposal: There are two methods to check the authentication information, AH (authentication header) and ESP (Encapsulating Security Payload).

ESP: Data will be encrypted and/or authentic. DES and 3DES encryption methods are supported. The DES uses 56 bits as an encryption method. The 3DES uses 128 bits as an encryption method. MD5 and SHA1 authentication protocols are supported. The authentication keys are a string and must be exactly 16 characters long for MD5 and 20 characters long for SHA1. The ESP can be one of following proposals:

.ESP: DES without Authentication

.ESP: 3DES without Authentication

.ESP: DES with MD5

.ESP: DES with SHA-1

.ESP: 3DES with MD5

ESP: 3DES with SHA-1

.ESP: MD5 without Encryption

.ESP: SHA-1 without Encryption

AH: Data will be authentic only. MD5 and SHA1 authentication protocols are supported. The authentication keys are a string and must be exactly 16 characters long for MD5 and 20 characters long for SHA1.

PreShared Key: IKE authentication method. This is a string from 8 characters to 128 characters. Both sides should use the same key.

Advanced IKE Setup: Press “Advanced IKE Setup” button, you will see Advanced IKE Setup page as below figure. Then, you can configure the parameters of IKE.

38

Image 42

Contents Bipac 7100S Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SPackage Contents Bipac 7100S FeaturesBipac 7100S Application IntroductionFlashes green when collision happens Lit green when power adapter is connectedLit green when the LAN link is connected Front LEDsCabling Line RJ-11 connector Reset LAN RJ-45 connectorRear Ports Through Ethernet PortBillion Bipac 7100S Adsl Modem/Router Before Configuration Configuring PC in Windows XPBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows ConfigurationBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Dhcp server function Information from ISPLAN Port WAN Port IP address IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN StatusStatus LAN Status Adsl Status ATM StatusStatus- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs3.1 WAN Select AdapterBillion Bipac 7100S Adsl Modem/Router ATM Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing 3.2 LAN Device IP AddressPassword SystemTime Zone Upgrade Factory SettingRestart Firewall Packet FilterConfiguration Bridge Filtering Intrusion DetectionBlock WAN Request Snork Attack UDP port loop-back TCP Null scanURL Blocking VPN Virtual Private Networks Billion Bipac 7100S Adsl Modem/Router Virtual Server Advanced Adsl3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Snmp Static Routing Misc Configuration Diagnostic TestTesting Ethernet LAN connection Testing Adsl SynchronizationTest ATM OAM Segment Loop Back Test ATM OAM End-to-End Loop Back Test Ethernet connect to ATMTest IP connect to PPP Save Config Problems with the LAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the WAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion