Billion Electric Company 7100S user manual Advanced, Adsl, 3.7.2 DNS

Page 44

Billion BIPAC 7100S ADSL Modem/Router

Port Type: Select TCP if you want to scope for the connection-based application service on the remote server using the port number. Or select UDP if you want to scope for the connectionless application service on the remote server using the port number.

Host IP Address: Enter the IP address of certain internal server to which requests from the specified port is forwarded.

3.4.3.7 Advanced

There are eight items under the Advanced section: ADSL,DNS. Dynamic DNS, NAT. RIP. Static Routing, MISC Configuration and Diagnostic Test.

3.4.3.7.1 ADSL

Trellis: Default at Enabled.

Handshake Protocol: Default at Autosense – G.dmt first. You can also choose other protocols, such as Autosense – T1.413 first, G.dmt/G.lite, T1.413, G.dmt, G.lite.

Wiring Selection: Default at Tip/Ring. Select Auto or A/A1 if necessary.

3.4.3.7.2 DNS

A Domain Name System (DNS) contains a mapping table for domain name and IP address. In the Internet, every host has a unique and friendly name such as www.yahoo.com and IP address. The IP address is so hard to remember that you may just enter the friendly name www.yahoo.com and then the DNS will convert it to its equivalent IP address.

40

Image 44

Contents Bipac 7100S Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SPackage Contents Bipac 7100S FeaturesBipac 7100S Application IntroductionLit green when power adapter is connected Lit green when the LAN link is connectedFlashes green when collision happens Front LEDsLine RJ-11 connector Reset LAN RJ-45 connector Rear PortsCabling Through Ethernet PortBillion Bipac 7100S Adsl Modem/Router Before Configuration Configuring PC in Windows XPBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows ConfigurationBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Information from ISP LAN Port WAN Port IP addressDhcp server function IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN StatusStatus LAN Status Adsl Status ATM StatusStatus- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs3.1 WAN Select AdapterBillion Bipac 7100S Adsl Modem/Router ATM MAC Spoofing Service Category Select UBR or CBR Dhcp ClientStatic IP Settings 3.2 LAN Device IP AddressPassword SystemTime Zone Upgrade Factory SettingRestart Firewall Packet FilterConfiguration Bridge Filtering Intrusion DetectionBlock WAN Request Snork Attack UDP port loop-back TCP Null scanURL Blocking VPN Virtual Private Networks Billion Bipac 7100S Adsl Modem/Router Virtual Server 3.7.2 DNS AdvancedAdsl Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Snmp Static Routing Misc Configuration Diagnostic TestTest ATM OAM Segment Loop Back Testing Ethernet LAN connectionTesting Adsl Synchronization Test IP connect to PPP Test ATM OAM End-to-End Loop BackTest Ethernet connect to ATM Save Config Problems Starting Up the Adsl Router Corrective Action Problems with the WAN Interface Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion