Billion Electric Company 7100S user manual 3.1 WAN, Select Adapter

Page 27

Chapter 3 Configuration

3.4.2 Quick Start

If you use this device to access the Internet through the ISP, this web page is enough for you to configure this router and access the Internet without a problem. Please check Chapter 3.3 (Information from the ISP), then enter the proper values into this web page, click the Apply button and then click the Save Config button to save all of the configuration parameters to FLASH. After the router reboot, you may check the Status web page to check whether the router is connected to the ISP or not. In most cases, you can access the Internet immediately. If not, please refer to the sections below for more information.

3.4.3 Configuration

When you click this item, you get following sub-items to configure BIPAC 7100S.

LAN, WAN, Firewall, System, VPN, Virtual Server, Advanced and Help

3.4.3.1 WAN

The screens below contain settings for the WAN interface toward Internet.

Select Adapter

23

Image 27

Contents Bipac 7100S Page Table of Contents Appendix An Overview of Bipac 7100S Chapter IntroductionBipac 7100S Features Package ContentsIntroduction Bipac 7100S ApplicationFront LEDs Lit green when power adapter is connectedLit green when the LAN link is connected Flashes green when collision happensThrough Ethernet Port Line RJ-11 connector Reset LAN RJ-45 connectorRear Ports CablingBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows XP Before ConfigurationBillion Bipac 7100S Adsl Modem/Router Configuration Configuring PC in WindowsBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings IP addresses for Information from ISPLAN Port WAN Port IP address Dhcp server functionConfiguring with Web Browser Quick Start StatusAdsl Status WAN Status Status Adsl StatusAdsl Status ATM Status Status LAN StatusLAN Status TCP Status Status- PPP StatusRouting Table Status- Learned MAC TableSecurity Logs System LogSelect Adapter 3.1 WANBillion Bipac 7100S Adsl Modem/Router ATM Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing Device IP Address 3.2 LANSystem PasswordTime Zone Factory Setting UpgradeRestart Packet Filter FirewallConfiguration Intrusion Detection Bridge FilteringSnork Attack UDP port loop-back TCP Null scan Block WAN RequestURL Blocking VPN Virtual Private Networks Billion Bipac 7100S Adsl Modem/Router Virtual Server Advanced Adsl3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Snmp Static Routing Diagnostic Test Misc ConfigurationTesting Ethernet LAN connection Testing Adsl SynchronizationTest ATM OAM Segment Loop Back Test ATM OAM End-to-End Loop Back Test Ethernet connect to ATMTest IP connect to PPP Save Config Problems Connecting to a Remote Node or ISP Problems Starting Up the Adsl Router Corrective ActionProblems with the WAN Interface Corrective Action Problems with the LAN Interface Corrective ActionContact Billion Appendix