Billion Electric Company 7100S user manual Upgrade, Factory Setting

Page 34

Billion BIPAC 7100S ADSL Modem/Router

3.4.3.3.3 Upgrade

To upgrade the firmware of BIPAC 7100S, you should download or copy the firmware to your local environment first. Press the “Browse…” button to specify the path of the firmware file. Then, click “Upgrade” to start upgrading. When the procedure is completed, BIPAC 7100S will reset automatically to make the new firmware work.

3.4.3.3.4 Factory Setting

If for any reason, you have to reset this router back to factory default settings, be careful that the current settings will be lost and the settings are reset back to its default value. The factory default values is detailed in the section 3.2 ‘‘Factory Default Settings’’.

30

Image 34

Contents Bipac 7100S Page Table of Contents Appendix Chapter Introduction An Overview of Bipac 7100SPackage Contents Bipac 7100S FeaturesBipac 7100S Application IntroductionFlashes green when collision happens Lit green when power adapter is connectedLit green when the LAN link is connected Front LEDsCabling Line RJ-11 connector Reset LAN RJ-45 connectorRear Ports Through Ethernet PortBillion Bipac 7100S Adsl Modem/Router Before Configuration Configuring PC in Windows XPBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows ConfigurationBillion Bipac 7100S Adsl Modem/Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Dhcp server function Information from ISPLAN Port WAN Port IP address IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN StatusStatus LAN Status Adsl Status ATM StatusStatus- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs3.1 WAN Select AdapterBillion Bipac 7100S Adsl Modem/Router ATM Static IP Settings Service Category Select UBR or CBR Dhcp ClientMAC Spoofing 3.2 LAN Device IP AddressPassword SystemTime Zone Upgrade Factory SettingRestart Firewall Packet FilterConfiguration Bridge Filtering Intrusion DetectionBlock WAN Request Snork Attack UDP port loop-back TCP Null scanURL Blocking VPN Virtual Private Networks Billion Bipac 7100S Adsl Modem/Router Virtual Server Adsl Advanced3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Snmp Static Routing Misc Configuration Diagnostic TestTesting Adsl Synchronization Testing Ethernet LAN connectionTest ATM OAM Segment Loop Back Test Ethernet connect to ATM Test ATM OAM End-to-End Loop BackTest IP connect to PPP Save Config Problems with the LAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the WAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion