Cisco Systems 1300 manual Power, 1shows the two outdoor access point/bridge configurations

Chapter 1 Overview

Key Features

Figure 1-1shows the two outdoor access point/bridge configurations.

Figure 1-1 Access Point Configurations

1

2

117059

1

Integrated antenna access point/bridge configuration

2

External antenna access point/bridge configuration with external antenna connectors

Note Antenna connectors are available only on the external antenna access point/bridge configuration.

Note The external antenna access point/bridge configuration does not ship with an external antenna. An external antenna must be purchased.

Power

The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.

The power injector is available in two models:

•Cisco Aironet Power Injector LR2—standard version (included with the access point/bridge)

–48-VDC input power

–Uses the 48-VDC power module (included with the access point/bridge)

Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide

1-4 OL-5048-06