Cisco Systems 1300 manual Troubleshooting Autonomous Access Points and Bridges

C H A P T E R 4

Troubleshooting Autonomous Access Points and Bridges

This chapter provides troubleshooting procedures for basic problems with the autonomous access point/bridge (model: AIR-BR1310G). For the most up-to-date, detailed troubleshooting information, refer to the Cisco Technical Support and Documentation website at the following URL:

http://www.cisco.com/en/US/products/hw/wireless/tsd_products_support_category_home.html

Sections in this chapter include:

•Checking the LEDs on an Autonomous Access Point/Bridge, page 4-2

•Power Injector, page 4-5

•Checking Power, page 4-6

•Checking Basic Configuration Settings, page 4-6

•Antenna Alignment, page 4-8

•Resetting the Autonomous Access Point/Bridge to the Default Configuration, page 4-10

•Reloading the Access Point/Bridge Image, page 4-11

•Obtaining the Autonomous Access Point/Bridge Image File, page 4-13

•Connecting to the Console Serial Port, page 4-14

•Obtaining the TFTP Server Software, page 4-15

Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide

OL-5048-06 4-1