Chapter 4 Troubleshooting Autonomous Access Points and Bridges
Checking the LEDs on an Autonomous Access Point/Bridge
The LED blinking error codes are described in Table
Table | LED Blinking Error Codes on an Autonomous Access Point/Bridge | ||
|
|
|
|
| Blinking Codes |
| |
|
|
|
|
| First | Second |
|
LED | Digit | Digit | Description |
|
|
|
|
Ethernet | 2 | 1 | Ethernet cable |
|
|
| and not defective. This error might also indicate a problem with the |
|
|
| Ethernet link. If the cable is connected properly and not defective, |
|
|
| contact technical support for assistance. |
|
|
|
|
Radio | 1 | 2 | Radio not |
|
|
|
|
| 1 | 3 | Radio not |
|
|
|
|
| 1 | 4 | Radio did not |
|
|
|
|
| 1 | 5 | Radio |
|
|
|
|
| 1 | 6 | Radio did not flash its |
|
|
| assistance. |
|
|
|
|
Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide
|
| |
|