Emulex 375 manual Switch Configuration Files, Restoring the Factory Default Settings

Page 41

EMULEX MODEL 375 SAN STORAGE SWITCH

CHAPTER 3: SWITCH MANAGEMENT

USERS GUIDE

To select the alternate firmware version for the next boot:

1.Under Next Boot Firmware Version, select Use Alternate Version on Next Reboot. The alternate firmware version currently displayed will be loaded on the next boot cycle.

2.Click Submit.

3.Click Reboot to reset the switch.

Switch Configuration Files

Switch configuration settings (for example, zoning or Port Smart Settings) can be saved for backup purposes or for loading the same configuration on multiple switches.

To save the current configuration:

1.Click Save to save the current switch configuration.

2.Click OK on the File Download dialog box.

3.Enter the directory path and file name, being sure to use a .cfg extension.

4.Click Save.

To load a saved configuration:

1.Under Download New Configuration File to Switch and Reboot, enter the directory path to the

.cfg file in the text box, or use the Browse button to navigate to the appropriate file.

2.In the Choose File dialog box, navigate to and select the appropriate file and click OK.

3.Click Start.

A message box appears confirming the download and required switch reset.

4.Click OK to proceed.

Restoring the Factory Default Settings

If necessary, the switch settings can be reset to their factory default values; however, the network configuration and port type settings are retained.

To restore the factory default configuration:

1.From the Restore Configuration to Factory Default section, click Restore. A message box appears confirming the request.

2.Click OK to restore the factory default configuration and reset the switch.

EMULEX CORPORATION

38

PART NUMBER 00041392-002 REV. B

Image 41
Contents Emulex Model ART N Umber 00041392-002 R EV. B Table of Contents Overview Chapter IntroductionInspeed Technology FeaturesStorage Consolidation and Shared Storage Pooling Switch ApplicationsTape Library Consolidation 3depicts a sample tape library consolidation configurationServer Clustering Rich MediaTo unpack the switch Installation PreparationDesktop Installation Rack InstallationSwitch Installation To place the switch on a desktopTo install the retention clip Installing the Retention Clips optionalTo insert the power cord with the retention clip in place To remove the power cord with the retention clip in placeEthernet LEDs indicate the network connection status Switch LedsEthernet LEDs Port LEDs System LEDsPower Supply/Fan Module LED Attaching a Device to the Switch Installing an SFPRemoving an SFP SFP CompatibilityTo boot the switch and SAN Booting the Switch and SANTo insert a new power supply/fan module Power SUPPLY/FAN Module ReplacementTo remove an old power supply/fan module Chapter Switch Management To connect through a serial interface Configuring the Network InterfaceGetting Started Command Button Description Submit Connecting to the Web ManagerWeb Manager Overview To connect to the Web ManagerReboot Command Button Description CancelLogin/Logout DocumentationLog in to the Switch Initial Switch SetupChange the Password To log in to the switchTo view the current date and time Click Switch Date & Time Change the Switch NameTo set the date and time settings To change the switch name Click Switch ConfigurationFrequent Switch Configuration Tasks Managing the SwitchConfiguring the Switch Settings Logging in to the SwitchTo change a switch setting To reset the switchNetwork Location General Switch SettingsSwitch Identification To change the switch speed Click Switch Configuration Switch SpeedVersion Information Blocking ARBTo configure an Snmp trap Setting Snmp TrapsTo synchronize time with the host system Click Host Time Configuring Date and Time SettingsTo change the time Click Switch Date & Time Opening a Telnet Session Changing the PasswordSwitch Password page appears To change switch thresholds or time intervals Adjusting the Switch ThresholdsSwitch Thresholds page appears Port Smart Settings page appears Configuring the Port Smart SettingsTo view the Port Smart Settings Click Port Smart Settings Default Smart Settings To assign a Smart Setting to one or more ports Creating Custom Smart SettingsTo set all ports to the currently selected Smart Setting To create a custom Smart SettingTo modify a custom Smart Setting Smart Setting AssignmentsTo rename a custom Smart Setting To delete a custom Smart SettingPort Information Pre-Insertion TestingFollowing settings are available Change Notifications Setting Description Stealth Intelligent ChangeManager Change Notification onPort Recovery Bypass on Clock Delta DiagnosticsSetting Description Port Control Switch Firmware Files Managing Firmware and Configuration FilesTo load new firmware on the switch To check for new firmwareRestoring the Factory Default Settings Switch Configuration FilesColor Description Down red One-Step ZoningUp green Not Active yellowSingle-Switch Zoning To add storage devices to multiple zones Adding Devices to Multiple Zones16 Ports in Multiple Zones on the One-Step Zoning Multiple Switch ZoningAlpa Zoning Recovering a Bad Zone AutomaticallyTo set up Hard Zoning Connecting Ports Through Hard ZoningTree Cascades Cascading SwitchesString Cascades 22 Automatic Trunking example Automatic Trunking23 Advanced Functions Automatic Trunking Load BalancingTo change the load balancing settings Load IndicatorsFairness and Prioritization Viewing Switch StatusMonitoring the Switch Current status is provided for the following items Switch InformationPort Color Indication Green Port Utilization and HealthYellow RedViewing the Event Log To view the event log Click Switch Event LogEvent Log Messages page appears Last time the event log was polled appears at the topPort Information page appears Viewing Port InformationTo view port information Click Port Information Port Utilization page appears Viewing Port UtilizationValue Description High AveragePort Diagnostics page appears Viewing Port DiagnosticsTo reset a port Click Advanced Functions Diagnostics Port To save diagnostic informationManual Port Operation To clear the countersViewing Ordered Sets Detection Indication F7 Initialization CRC ErrorChange Notification UnknownTroubleshooting Device Connections Port Bypass Conditions and Recovery Troubleshooting Management ConnectionsDefault Smart Setting Attributes Fibre Channel References Appendixes Operating Conditions Switch SpecificationsLogging in and OUT Connecting to the CLITo connect through a network interface To log in to the CLIFrequent Switch Configuration Tasks Using the CLICLI Commands Event Event Message Severity Severity Description LevelPort Ptbi failed due to timeout Error during Port DiscLIP Cycle Timeout System config reset to factory defaultHex Decimal Arbitrated Loop Physical AddressesLoop Physical Address Alpa or ArbitratedArbitration Current Fill WordIndex SFP Part Number 00041392-002 REV. B