Cabletron Systems user manual Connections, FOT-F3

OVERVIEW OF THE FOT-F3

DB15 AUI Port SQE Switch LANVIEW LEDs

ST Fiber Optic Ports

FOT-F3	SQE
P	S	X	R	C
W	Q	M	C	L
R	E	T	V	N

802.3COMPATIBLE SINGLE MODE FIBER OPTIC TRANSCEIVER with LANVIEW®

L N K

TX

RX

1300nm

SN

End View Front View

Figure 1-1 FOT-F3

End View

0461-01

1.3.1 Connections

The FOT-F3 connects two active Ethernet devices using an AUI cable and a fiber optic link segment. Devices such as repeaters, multiport repeaters, multiport transceivers or host systems are connected using fiber optic cables.

The FOT-F3 is fully compatible with IEEE 802.3 and uses the same signaling specified in FOIRL specifications. It provides the flexibility to connect to networks using Ethernet Version 1, Version 2, and/or IEEE 802.3 equipment through an AUI port. However, the FOT-F3 uses 1300 nm wave-length optical transmitters and receivers and should be used only with Cabletron Systems Ethernet single mode products such as the FOMIM-36, FOMIM-32, and the FOMIM-38.

FOT-F3 USER’S MANUAL 1-3