Cabletron Systems BRIM-T6 manual Tpim Configuration for Station Applications

INSTALLATION

Top View

(See Below For Settings)

P

H1

A

N

T

OM 0

S RI/RO

TPIM-T1/TPIM-T2/TPIM-T4

Phantom Switch Settings

1 = Cabletron Device (Default)

0 = Non-Cabletron Device

RI/RO-STN Switch Settings

RI/RO = Ring In/Ring Out (Default)

S = Station (BRIM-T6 Functional)

8
0		REV
5
2	Ctron
.		-.0X
S	RI/RO
T		.
N		.
		PN . .

TPIM-F2/TPIM-F3

Fiber Key Settings

Ctron = Cabletron Device

802.5 = BRIM-T6 Functional

RI/RO-STN Switch Settings

RI/RO = Ring In Ring Out (Default)

STN = Station (BRIM-T6 Functional)

Part Number

Figure 2-4. TPIM Configuration for Station Applications

NOTE: If the switch locations on a TPIM do not match the example locations illustrated in Figure 2-4, refer to the TPIM Reference Card included with the TPIM. The TPIM Reference Card outlines switch locations and settings. For additional help, call Cabletron Systems Technical Support Department (see Section 1.5).

2-7