Cabletron Systems BRIM-F6 manual Chapter Installation, Unpacking the Hsim

Page 17

CHAPTER 2

INSTALLATION

This chapter contains instructions for the following items:

•Unpacking the HSIM (Section 2.1)

•Installing FPIMs (Section 2.2)

•Installing an HSIM (Section 2.3)

To install the HSIM and FPIMs, you need the following items:

•Antistatic wrist strap (provided with 6C105 chassis or standalone hub)

•Phillips screwdriver

!

CAUTION

The HSIM-F6 and the host module or hub are sensitive to static discharges. Use a grounding strap and observe all static precautions during this procedure. Failure to do so could result in damage to the HSIM-F6, host module or hub.

2.1UNPACKING THE HSIM

Unpack the HSIM as follows:

1.Remove the shipping box material covering the HSIM.

2.Carefully remove the module from the shipping box. Leave the module in its non-conductive bag until you are ready to install it.

3.Attach the antistatic wrist strap. If the HSIM is to be installed in a standalone hub, refer to the instructions on the antistatic wrist strap package. If the HSIM is to be installed in an interface module, refer to the applicable interface module User’s Guide.

4.After removing the module from its non-conductive bag, visually inspect the device. If you notice any signs of damage, contact Cabletron Systems Global Call Center immediately. Refer to Section 1.3, Getting Help, for instructions.

HSIM-F6 User’s Guide

2-1

Image 17

Contents HSIM-F6 Page HSIM-F6 User’s Guide DOC Notice Cabletron Software Program License HSIM-F6 User’s Guide Declaration of Conformity HSIM-F6 User’s Guide Contents Viii HSIM-F6 User’s Guide Chapter Introduction Document Conventions Using this ManualYour email address Getting HelpOverview FeaturesSpecifications Cabletron Systems Fddi Technology Guide Related DocumentationUnpacking the Hsim Chapter InstallationPress the Fpim connector into the Hsim pins Installing FPIMsInstalling FPIMs Installing an Hsim in an Interface Module Installing AN HsimInstalling an Hsim HSIM-F6 User’s Guide Installing the HSIM-F6 Installing an Hsim in a Standalone HubHSIM-F6 User’s Guide Chapter Local Management Key Function Local Management Keyboard ConventionsKeyboard Conventions Exiting Local Management Screens Selecting Local Management Menu Screen ItemsNavigating Local Management Screens HSIM-F6 Setup ScreenHSIM-F6 Setup Screen HSIM-F6 Conﬁguration HSIM-F6 Statistics Screen HSIM-F6 Statistics ScreenMIB-II Statistics Screen HSIM-F6 Statistics Screen FieldsMIB-II Interface Statistics Screen Fields HSIM-F6 Fddi Ring Statistics Screen Ring Statistics ScreenHSIM-F6 Fddi Ring Statistics Screen Fields MAC Configuration Primary Out Port a Isolated Both port a and port B are isolated from the ring Master Port Count 11 The Ring Map Conﬁguration Screen Ring MAP Configuration ScreenRing Map Conﬁguration Screen Fields Adjusting the Scroll Number n Ring Map Conﬁguration Screen Commands12 The Ring Map Node Information Screen Node Information ScreenNode Information Screen Fields 13 The HSIM-F6 Conﬁguration Screen HSIM-F6 Configuration ScreenHSIM-F6 Conﬁguration Screen Fields 14 The Fddi Full Duplex Conﬁguration Screen Full Duplex Configuration ScreenFull Duplex Fddi Full Duplex Conﬁguration Screen Fields 3 Conﬁguring the HSIM-F6 for Full Duplex Operation FDDI/ETHERNET Translation Configuration Screen Ethernet Ethernet Snap Fddi Translation Conﬁguration Screen FieldsDefault setting for the Novell Fddi 802.2 ﬁeld is Ethernet Enabled Setting Frame Translation TypesSetting the Interpret 802.3 Length Field to Enabled Setting the Frame Translation Types to the Default ValuesHSIM-F6 User’s Guide Color Deﬁnition HSIM-F6 Transmit and Receive LEDsPort a and Port B LED States and Deﬁnitions Color DefinitionA, B, P, S LED Deﬁnitions HSIM-F6 LED State DefinitionsHSIM-F6 User’s Guide HSIM-F6 LED State Deﬁnitions HSIM-F6 User’s Guide Multimode Speciﬁcations Fiber Optic InterfaceMultimode Transmitter Speciﬁcations Multimode Receiver SpeciﬁcationsMultimode Receiver Signal Detect Speciﬁcations Single Mode SpeciﬁcationsSingle Mode Transmitter Speciﬁcations Single Mode Receiver SpeciﬁcationsSingle Mode Receiver Signal Detect Single Mode Receiver Signal Detect SpeciﬁcationsUTP Receiver Signal Detect Unshielded Twisted Pair UTP SpecificationsUTP Receiver Signal Detect UTP Transmitter Speciﬁcations10 STP Receiver Signal Detect Speciﬁcations Shielded Twisted Pair STP Transmitter SpecificationsSTP Receiver Signal Detect STP Transmitter SpeciﬁcationsMultimode Fiber Optic Cable Length Cable SpecificationsSingle Mode Fiber Optic Cable Length Twisted Pair Cable Length Twisted Pair Pinout ConfigurationHSIM-F6 User’s Guide Worst Typical Parameter Typical Value Case Budget Table A-1 FPIM-00 and FPIM-01 SpecificationsFPIM-00 and FPIM-01 Figure A-2 FPIM-02 and FPIM-04 Pinouts FPIM-02 and FPIM-04Parameter Typical Value Minimum Maximum Table A-2 FPIM-05 and FPIM-07 SpecificationsFPIM-05 and FPIM-07 HSIM-F6 User’s Guide

Related manuals

Manual 43 pages 29.03 Kb