Cabletron Systems BRIM-F6 manual Ring MAP Configuration Screen, The Ring Map Configuration Screen

Chapter 3: Local Management

3.7THE RING MAP CONFIGURATION SCREEN

The Ring Map Configuration screen displays FDDI formatted addresses of ring stations in a graphic illustration of the FDDI ring topology, and provides access to a Node Information screen for each device located on the ring.

To access the Ring Map Configuration screen from the HSIM-F6 Setup screen, perform the following steps:

1.Use the arrow keys to highlight the Ring Map Configuration menu item on the HSIM-F6 Setup screen.

2.Press ENTER. The Ring Map Configuration screen, Figure 3-11, displays.

Device Name: 6E132-25		Flash Image Revision: XX.XX.XX
Slot Number: X		BOOTPROM Revision: XX.XX.XX
	Ring Map Configuration
FDDI Address: 00:00: B8: 08: F9: C4			MAC Count: 3
Current Ring Map: Primary			Address Mode: [MAC]
00: 00: B8: 08: F9: C4 (DAS) <<<<<<<<<<<<<<<<<<<< (DAS) 00: 00: B8: 08: DB: 11
00: 00: B8: 08: F9: FA (DAC) >>>>>>>>>>>>>>>>>>>>
SCROLL DOWN 1	SCROLL UP 1	EXIT	RETURN
			209141

NOTE

Figure 3-11 The Ring Map Configuration Screen

Under some conditions the display must remain on the screen for at least 30 seconds to accurately reflect ring configuration. A neighbor time-out can take as long as 228 seconds to update on the ring map.

3-16 HSIM-F6 User’s Guide