Cabletron Systems BRIM-F6 manual Chapter Local Management

Page 25

CHAPTER 3

LOCAL MANAGEMENT

This chapter provides instructions on conﬁguring the HSIM-F6 to operate in full duplex FDDI mode, viewing HSIM-F6 FDDI statistics, translating speciﬁc FDDI frame types to speciﬁc Ethernet frame types and to viewing the FDDI ring topology using Local Management.

NOTE

When installed, the HSIM-F6 provides additional Local Management features. These features are accessed by entering Local Management of the host interface module or standalone hub. Refer to the host device User’s Guide to establish a Local Management connection.

Make sure that the following requirements have been met before conﬁguring the HSIM-F6 through Local Management:

•At least one FPIM is installed in the HSIM-F6.

•The HSIM-F6 is installed in the host interface module or standalone hub.

•The device is up and running.

•A Local Management terminal is properly conﬁgured and connected to the host interface module or standalone hub in which the HSIM-F6 resides.

NOTE

If the HSIM-F6 is being conﬁgured to operate in full duplex mode, two FPIMs must be installed before proceeding.

To view HSIM-F6 FDDI statistics and ring topology, the HSIM-F6 must be connected to the FDDI ring.

HSIM-F6 User’s Guide

3-1

Image 25

Contents HSIM-F6 Page HSIM-F6 User’s Guide DOC Notice Cabletron Software Program License HSIM-F6 User’s Guide Declaration of Conformity HSIM-F6 User’s Guide Contents Viii HSIM-F6 User’s Guide Chapter Introduction Document Conventions Using this ManualYour email address Getting HelpOverview FeaturesSpecifications Cabletron Systems Fddi Technology Guide Related DocumentationUnpacking the Hsim Chapter InstallationPress the Fpim connector into the Hsim pins Installing FPIMsInstalling FPIMs Installing an Hsim in an Interface Module Installing AN HsimInstalling an Hsim HSIM-F6 User’s Guide Installing the HSIM-F6 Installing an Hsim in a Standalone HubHSIM-F6 User’s Guide Chapter Local Management Keyboard Conventions Local Management Keyboard ConventionsKey Function Exiting Local Management Screens Selecting Local Management Menu Screen ItemsNavigating Local Management Screens HSIM-F6 Setup ScreenHSIM-F6 Setup Screen HSIM-F6 Conﬁguration HSIM-F6 Statistics Screen HSIM-F6 Statistics ScreenMIB-II Statistics Screen HSIM-F6 Statistics Screen FieldsMIB-II Interface Statistics Screen Fields HSIM-F6 Fddi Ring Statistics Screen Ring Statistics ScreenHSIM-F6 Fddi Ring Statistics Screen Fields MAC Configuration Primary Out Port a Isolated Both port a and port B are isolated from the ring Master Port Count 11 The Ring Map Conﬁguration Screen Ring MAP Configuration ScreenRing Map Conﬁguration Screen Fields Adjusting the Scroll Number n Ring Map Conﬁguration Screen Commands12 The Ring Map Node Information Screen Node Information ScreenNode Information Screen Fields 13 The HSIM-F6 Conﬁguration Screen HSIM-F6 Configuration ScreenHSIM-F6 Conﬁguration Screen Fields 14 The Fddi Full Duplex Conﬁguration Screen Full Duplex Configuration ScreenFull Duplex Fddi Full Duplex Conﬁguration Screen Fields 3 Conﬁguring the HSIM-F6 for Full Duplex Operation FDDI/ETHERNET Translation Configuration Screen Ethernet Ethernet Snap Fddi Translation Conﬁguration Screen FieldsDefault setting for the Novell Fddi 802.2 ﬁeld is Ethernet Enabled Setting Frame Translation TypesSetting the Interpret 802.3 Length Field to Enabled Setting the Frame Translation Types to the Default ValuesHSIM-F6 User’s Guide Color Deﬁnition HSIM-F6 Transmit and Receive LEDsPort a and Port B LED States and Deﬁnitions Color DefinitionA, B, P, S LED Deﬁnitions HSIM-F6 LED State DefinitionsHSIM-F6 User’s Guide HSIM-F6 LED State Deﬁnitions HSIM-F6 User’s Guide Multimode Speciﬁcations Fiber Optic InterfaceMultimode Transmitter Speciﬁcations Multimode Receiver SpeciﬁcationsMultimode Receiver Signal Detect Speciﬁcations Single Mode SpeciﬁcationsSingle Mode Transmitter Speciﬁcations Single Mode Receiver SpeciﬁcationsSingle Mode Receiver Signal Detect Single Mode Receiver Signal Detect SpeciﬁcationsUTP Receiver Signal Detect Unshielded Twisted Pair UTP SpecificationsUTP Receiver Signal Detect UTP Transmitter Speciﬁcations10 STP Receiver Signal Detect Speciﬁcations Shielded Twisted Pair STP Transmitter SpecificationsSTP Receiver Signal Detect STP Transmitter SpeciﬁcationsSingle Mode Fiber Optic Cable Length Cable SpecificationsMultimode Fiber Optic Cable Length Twisted Pair Cable Length Twisted Pair Pinout ConfigurationHSIM-F6 User’s Guide FPIM-00 and FPIM-01 Table A-1 FPIM-00 and FPIM-01 SpecificationsWorst Typical Parameter Typical Value Case Budget Figure A-2 FPIM-02 and FPIM-04 Pinouts FPIM-02 and FPIM-04FPIM-05 and FPIM-07 Table A-2 FPIM-05 and FPIM-07 SpecificationsParameter Typical Value Minimum Maximum HSIM-F6 User’s Guide

Related manuals

Manual 43 pages 29.03 Kb