Cabletron Systems BRIM-F6 manual Color Definition, Port a and Port B LED States and Definitions

Chapter 4: LANVIEW LEDs

The following table describes the four possible states of the port A and port B LEDs of the HSIM-F6.

Table 4-2 Port A and Port B LED States and Definitions

Color	Definition
Green	Valid link to port and port enabled
Amber	Port disabled via management
Off	No valid link or no cable attached
Red	Possible hardware or FDDI ring failure

The A and B LEDs will sometimes flash red briefly while

!performing diagnostics. If they remain red for several minutes,

CAUTION	however, it could indicate a hardware failure. If the LEDs
	remain red, contact Cabletron Systems Global Call Center.

The following table defines the different conditions that the HSIM-F6 can be in depending on the status (colors) of the A, B, P, and S LEDs respectively. Refer to Section 4.1 for more detailed definitions of the LED states.

If the HSIM-F6 P and S LEDs remain red for several minutes

!the HSIM-F6 could have a hardware problem. Contact

CAUTION Cabletron Systems Global Call Center.

4-2 HSIM-F6 User’s Guide