Cabletron Systems BRIM-F6 manual HSIM-F6 User’s Guide

Page 24

Chapter 2: Installation

3.Attach the antistatic wrist strap (refer to the instructions outlined on the antistatic wrist strap package).

4.Remove the hub chassis cover (refer to your specific hub documentation for instructions on removing the hub chassis cover).

5.Refer to Figure 2-3and remove the two faceplate mounting screws and the HSIM coverplate. Save the screws.

6.Refer to Figure 2-3and remove the two standoff screws. Save the screws.

7.Place the HSIM behind the hub faceplate.

8.Align the HSIM connector of the HSIM with the pins on the hub.

9.Press down firmly on the back of the HSIM until the pins slide all the way into the HSIM connector holes.

NOTE

Ensure that the standoffs on the hub align with the standoff screw holes on the HSIM.

10.Secure the HSIM-F6 to the module faceplate using the mounting screws saved in step 5.

11.Secure the HSIM-F6 to the module standoffs using the standoff screws saved in step 6.

Ensure that the chassis cover is in place before reconnecting the power cord.

12.Reattach the chassis cover to the hub, reconnect the power cord, and reconnect the hub to the network.

Refer to Chapter 3 for instructions on configuring the HSIM-F6 using Local Management.

2-8	HSIM-F6 User’s Guide

Image 24

Contents HSIM-F6 Page HSIM-F6 User’s Guide DOC Notice Cabletron Software Program License HSIM-F6 User’s Guide Declaration of Conformity HSIM-F6 User’s Guide Contents Viii HSIM-F6 User’s Guide Chapter Introduction Using this Manual Document ConventionsGetting Help Your email addressFeatures OverviewSpecifications Related Documentation Cabletron Systems Fddi Technology GuideChapter Installation Unpacking the HsimInstalling FPIMs Press the Fpim connector into the Hsim pinsInstalling FPIMs Installing AN Hsim Installing an Hsim in an Interface ModuleInstalling an Hsim HSIM-F6 User’s Guide Installing an Hsim in a Standalone Hub Installing the HSIM-F6HSIM-F6 User’s Guide Chapter Local Management Local Management Keyboard Conventions Keyboard ConventionsKey Function Selecting Local Management Menu Screen Items Exiting Local Management ScreensHSIM-F6 Setup Screen Navigating Local Management ScreensHSIM-F6 Setup Screen HSIM-F6 Conﬁguration HSIM-F6 Statistics Screen HSIM-F6 Statistics ScreenHSIM-F6 Statistics Screen Fields MIB-II Statistics ScreenMIB-II Interface Statistics Screen Fields Ring Statistics Screen HSIM-F6 Fddi Ring Statistics ScreenHSIM-F6 Fddi Ring Statistics Screen Fields MAC Configuration Primary Out Port a Isolated Both port a and port B are isolated from the ring Master Port Count Ring MAP Configuration Screen 11 The Ring Map Conﬁguration ScreenRing Map Conﬁguration Screen Fields Ring Map Conﬁguration Screen Commands Adjusting the Scroll Number nNode Information Screen 12 The Ring Map Node Information ScreenNode Information Screen Fields HSIM-F6 Configuration Screen 13 The HSIM-F6 Conﬁguration ScreenHSIM-F6 Conﬁguration Screen Fields Full Duplex Configuration Screen 14 The Fddi Full Duplex Conﬁguration ScreenFull Duplex Fddi Full Duplex Conﬁguration Screen Fields 3 Conﬁguring the HSIM-F6 for Full Duplex Operation FDDI/ETHERNET Translation Configuration Screen Fddi Translation Conﬁguration Screen Fields Ethernet Ethernet SnapDefault setting for the Novell Fddi 802.2 ﬁeld is Ethernet Setting Frame Translation Types EnabledSetting the Frame Translation Types to the Default Values Setting the Interpret 802.3 Length Field to EnabledHSIM-F6 User’s Guide HSIM-F6 Transmit and Receive LEDs Color DeﬁnitionColor Definition Port a and Port B LED States and DeﬁnitionsHSIM-F6 LED State Definitions A, B, P, S LED DeﬁnitionsHSIM-F6 User’s Guide HSIM-F6 LED State Deﬁnitions HSIM-F6 User’s Guide Fiber Optic Interface Multimode SpeciﬁcationsMultimode Transmitter Speciﬁcations Multimode Receiver SpeciﬁcationsSingle Mode Speciﬁcations Multimode Receiver Signal Detect SpeciﬁcationsSingle Mode Transmitter Speciﬁcations Single Mode Receiver SpeciﬁcationsSingle Mode Receiver Signal Detect Speciﬁcations Single Mode Receiver Signal DetectUnshielded Twisted Pair UTP Specifications UTP Receiver Signal DetectUTP Receiver Signal Detect UTP Transmitter SpeciﬁcationsShielded Twisted Pair STP Transmitter Specifications 10 STP Receiver Signal Detect SpeciﬁcationsSTP Receiver Signal Detect STP Transmitter SpeciﬁcationsCable Specifications Single Mode Fiber Optic Cable LengthMultimode Fiber Optic Cable Length Twisted Pair Pinout Configuration Twisted Pair Cable LengthHSIM-F6 User’s Guide Table A-1 FPIM-00 and FPIM-01 Specifications FPIM-00 and FPIM-01Worst Typical Parameter Typical Value Case Budget FPIM-02 and FPIM-04 Figure A-2 FPIM-02 and FPIM-04 PinoutsTable A-2 FPIM-05 and FPIM-07 Specifications FPIM-05 and FPIM-07Parameter Typical Value Minimum Maximum HSIM-F6 User’s Guide

Related manuals

Manual 43 pages 29.03 Kb