Cabletron Systems BRIM-F6 manual Default setting for the Novell Fddi 802.2 field is Ethernet

Page 53

The FDDI/Ethernet Translation Configuration Screen

Translate all Novell FDDI 802.2 Frames to

This field allows the user to translate all Novell FDDI 802.2 frames to a specific Ethernet frame type. The Ethernet frame types that are available are as follows:

•Ethernet II

•Ethernet SNAP

•Ethernet 802.3

•Ethernet 802.2

The default setting for the Novell FDDI 802.2 field is Ethernet 802.2.

Translate all Novell FDDI MAC Frames to

This field allows the user to translate all Novell FDDI MAC frames to a specific Ethernet frame type. The Ethernet frame types that are available are as follows:

•Ethernet II

•Ethernet SNAP

•Ethernet 802.3

•Ethernet 802.2

The default setting for the Novell FDDI MAC field is Ethernet 802.2.

The Interpret 802.3 Length for Frames > 64 Bytes

This field allows the user to enable the HSIM-F6 to examine the length field of an 802.3 Ethernet frame to determine if the sending device has added padding to a frame that contains more than the Ethernet minimum of 64 bytes. If padding has been added, the HSIM-F6 removes any padding before sending the frame onto the FDDI ring.

NOTE

The HSIM-F6 automatically checks for padding all Ethernet frames that are the minimum 64 bytes in length.

HSIM-F6 User’s Guide

3-29

Page 52 Page 54
Image 53
Page 52 Page 54
Contents HSIM-F6 Page HSIM-F6 User’s Guide DOC Notice Cabletron Software Program License HSIM-F6 User’s Guide Declaration of Conformity HSIM-F6 User’s Guide Contents Viii HSIM-F6 User’s Guide Chapter Introduction Document Conventions Using this ManualYour email address Getting HelpOverview FeaturesSpecifications Cabletron Systems Fddi Technology Guide Related DocumentationUnpacking the Hsim Chapter InstallationPress the Fpim connector into the Hsim pins Installing FPIMsInstalling FPIMs Installing an Hsim in an Interface Module Installing AN HsimInstalling an Hsim HSIM-F6 User’s Guide Installing the HSIM-F6 Installing an Hsim in a Standalone HubHSIM-F6 User’s Guide Chapter Local Management Key Function Local Management Keyboard ConventionsKeyboard Conventions Exiting Local Management Screens Selecting Local Management Menu Screen ItemsNavigating Local Management Screens HSIM-F6 Setup ScreenHSIM-F6 Setup Screen HSIM-F6 Configuration HSIM-F6 Statistics Screen HSIM-F6 Statistics ScreenMIB-II Statistics Screen HSIM-F6 Statistics Screen FieldsMIB-II Interface Statistics Screen Fields HSIM-F6 Fddi Ring Statistics Screen Ring Statistics ScreenHSIM-F6 Fddi Ring Statistics Screen Fields MAC Configuration Primary Out Port a Isolated Both port a and port B are isolated from the ring Master Port Count 11 The Ring Map Configuration Screen Ring MAP Configuration ScreenRing Map Configuration Screen Fields Adjusting the Scroll Number n Ring Map Configuration Screen Commands12 The Ring Map Node Information Screen Node Information ScreenNode Information Screen Fields 13 The HSIM-F6 Configuration Screen HSIM-F6 Configuration ScreenHSIM-F6 Configuration Screen Fields 14 The Fddi Full Duplex Configuration Screen Full Duplex Configuration ScreenFull Duplex Fddi Full Duplex Configuration Screen Fields 3 Configuring the HSIM-F6 for Full Duplex Operation FDDI/ETHERNET Translation Configuration Screen Ethernet Ethernet Snap Fddi Translation Configuration Screen FieldsDefault setting for the Novell Fddi 802.2 field is Ethernet Enabled Setting Frame Translation TypesSetting the Interpret 802.3 Length Field to Enabled Setting the Frame Translation Types to the Default ValuesHSIM-F6 User’s Guide Color Definition HSIM-F6 Transmit and Receive LEDsPort a and Port B LED States and Definitions Color DefinitionA, B, P, S LED Definitions HSIM-F6 LED State DefinitionsHSIM-F6 User’s Guide HSIM-F6 LED State Definitions HSIM-F6 User’s Guide Multimode Specifications Fiber Optic InterfaceMultimode Transmitter Specifications Multimode Receiver SpecificationsMultimode Receiver Signal Detect Specifications Single Mode SpecificationsSingle Mode Transmitter Specifications Single Mode Receiver SpecificationsSingle Mode Receiver Signal Detect Single Mode Receiver Signal Detect SpecificationsUTP Receiver Signal Detect Unshielded Twisted Pair UTP SpecificationsUTP Receiver Signal Detect UTP Transmitter Specifications10 STP Receiver Signal Detect Specifications Shielded Twisted Pair STP Transmitter SpecificationsSTP Receiver Signal Detect STP Transmitter SpecificationsMultimode Fiber Optic Cable Length Cable SpecificationsSingle Mode Fiber Optic Cable Length Twisted Pair Cable Length Twisted Pair Pinout ConfigurationHSIM-F6 User’s Guide Worst Typical Parameter Typical Value Case Budget Table A-1 FPIM-00 and FPIM-01 SpecificationsFPIM-00 and FPIM-01 Figure A-2 FPIM-02 and FPIM-04 Pinouts FPIM-02 and FPIM-04Parameter Typical Value Minimum Maximum Table A-2 FPIM-05 and FPIM-07 SpecificationsFPIM-05 and FPIM-07 HSIM-F6 User’s Guide
Related manuals
Manual 43 pages 29.03 Kb
Top Page Image Contents