Listening to the Radio
1 2 3
1Press the TUNER (FM/AM) button.
2To select FM or AM, press the TUNER (FM/AM) button again.
3Select the station you want to listen to (auto selection).
Hold down the TUNING/SKIP button (.or/) for more than 2 seconds and release it when the frequency display begins to change.
When a station is tuned in, the tuning process will stop automatically.
<To stop the auto selection, press the TUNING/SKIP button.
Selecting stations which cannot be tuned automatically (manual selection)
When the TUNING/SKIP button (.or/) is pressed momentarily the frequency changes by a fixed step.
Press the TUNING/SKIP button repeatedly until the station you want to listen to is found.
If the reception is poor
For the best reception, rotate the FM or the AM antenna until you get stations clearly.
FM mode
Pressing this button alternates between STEREO mode and MONO mode.
STEREO
FM stereo broadcasts are received in stereo and the “ST” indicator will light.
MONO
In weak FM stereo reception areas, select this mode. Reception will now be forced to monaural, reducing unwanted noise.
20