Troubleshooting
If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center.
General
No power
eCheck the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan into the outlet.
No sound from speakers.
eSelect the source by pressing the iPod/shuffle, AUX or TUNER (FM/AM) button.
eAdjust the volume.
ePull out the headphone’s plug from the PHONES jack.
eCheck if the sound is muted. If that is the case, press the MUTING button again.
The sound is noisy.
eThe unit is too close to a TV or similar appliances. Install the unit apart from them, or turn them off.
Remote control doesn’t work.
ePress the STANDBY/ON button to turn the unit on.
eIf the battery is exhausted, replace it with a new one.
eUse remote control unit within the range (5 m) and point at the remote sensor on the front panel.
eClear obstacles between the remote control unit and the main unit.
eIf a strong light is near the unit, turn it off.
iPod Player
Cannot insert the iPod. eCheck the dock adapter.
eRemove dust or obstacles from the Dock connector of the
Will not play.
eRemove the iPod from the dock, wait a few seconds, and insert it again.
eSoftware update may solve the problem. Visit the Apple website and download the latest iPod Software.
Cannot operate the iPod.
eSet the HOLD switch of the iPod to off.
Tuner
Cannot listen to any station, or signal is too weak.
eTune in the station properly.
eRotate the FM or the AM antenna until you get stations clearly.
If normal operation cannot be resumed, unplug the power cord from the outlet and plug it again.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. Allow the surface of the unit to dry completely before using.
ENGLISH
25