Moxa Technologies MOXA AirWorks, AWK-1100 Viewing Status, Associated Wireless Clients, System Log

Page 20

MOXA AirWorks AWK-1100 User’s Manual

Web Console Configuration

Viewing Status

Associated Wireless Clients

On this page, the status information of each associated client, including its MAC address, IP address, user name (if the client has been IEEE 802.1X authenticated), number of bytes it has sent, number of bytes it has received, and the time of its last activity, is shown.

Current DHCP Mappings

On this page, all the current static or dynamic DHCP mappings are shown. A DHCP mapping is a correspondence relationship between an IP address assigned by the DHCP server and a computer or device that obtains the IP address. A computer or device that acts as a DHCP client is identified by its MAC address.

A static mapping indicates that the DHCP client always obtains the specified IP address from the DHCP server. You can set static DHCP mappings in the Static DHCP Mappings section of the DHCP Server configuration page. A dynamic mapping indicates that the DHCP server chooses an IP address from the IP address pool specified by the First allocateable IP address and allocateable IP address count settings on the DHCP Server configuration page.

System Log

System events are recorded in the memory of the AWK-1100. The logged information is useful for troubleshooting purposes. The system events are divided into several categories, and you can select which categories of events to log.

3-4

Image 20

Contents Moxa AirWorks AWK-1100 User’s Manual First Edition, JulyDisclaimer Copyright NoticeTrademarks Table of Contents Page Introduction Package Checklist Product FeaturesProduct Specifications OverviewMechanical Page ‰ Confirming the Settings of the AP and Client Computers Getting StartedFirst-Time Installation and Configuration AP Client Select the Operational Mode for AWK-1100AP/Bridge Configure AWK-1100’s Ieee 802.11 settings Review and Apply SettingsConfiguring Ieee 802.11g-related Settings Deploying the Access Point APSetting up Client Computers Checking if the Ieee 802.11g-related Settings Work Confirming the Settings of the AP and Client ComputersConfiguring TCP/IP-related Settings Checking if the TCP/IP-related Settings Work To check if a client computer can assess the InternetPage Web Console Configuration ‰ Viewing StatusMenu Structure Save, Save & Restart, and Cancel Buttons Home and Refresh ButtonsAssociated Wireless Clients Viewing StatusCurrent Dhcp Mappings System LogLink Monitor AP Client mode only Specifying the Operational ModeGeneral Operations STA-APAdministrative Password Managing the FirmwareUpgrading Firmware by Http AP/Bridge AP ClientBacking up and Restoring Configuration Settings by Http Upgrading Firmware by TftpChoose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Addressing Configuring TCP/IP-related SettingsResetting the Configuration to Factory Defaults Static Dhcp Mappings Dhcp Server AP/Bridge modes onlyBasic Link Integrity Configuring Ieee 802.11g-related SettingsCommunication AP Load Balancing Wireless Distribution SystemAssociation Control Sample wireless bridge network topology Security STA Shared Key , and Auto Set the Access control type to inclusive MAC-Address-Based Access ControlSet the Access control type to exclusive Ieee 802.1X/RADIUS AP mode only Click DownloadInternet Configuring Advanced Settings Packet FiltersEthernet Type Filters IP Protocol FiltersManagement TCP/UDP Port FiltersUPnP System LogSnmp Page Default Settings LAN Interface ManagementSnmp read community Snmp write communityWireless client computer cannot associate with an AWK-1100 TroubleshootingWireless Settings Problems TCP/IP Settings Problems AP does not respond to ping from the client computerUnknown Problems Moxa AirWorks AWK-1100 User’s Manual TTE Compliance Statement Regulatory StatementFederal Communication Commission Interference Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Moxa Internet Services Following services are providedProblem Report Form Moxa Product † AWK-1100-US † AWK-1100-EU Serial NumberProduct Return Procedure